last month, i asked what you would put on a wall in your shop. this is what i finally did.
Before:
Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to
or
Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to
or
after all rough in's, electrical, fix insulation. i added 2 separate 120V circuits to help split the load. there are now 3 utility circuits(all GFCI protected) and 1 light circuit:
Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to
or
with plywood up. i used ˝" CDX, picking out the best sheets i could:
Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to
or
2 coats of primer:
Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to
or
and this is where I am today. the shelving is rubbermaid wire shelve. the pegboard is from a old display that was destined for recycle, i got it all for $1:
Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to
or