Woodturner's Resource
Woodturner's Resource  
  ē Featured Artist    ē Websites   Support Wr
Tutorials, Projects & Tips   ē Event Calendar   ē Tool and Book Store
  Home Page Forum HelpSearch Map TPT Resources LoginRegister
 
Pages: 1 2 
Send Topic Print
Hearing Protection (Read 964 times)
 
Ed Weber
WR Global Moderator
WR Patron
*****
Offline



Posts: 4,701

Wilton, California, USA
Wilton
California
USA

Gender: male

JET 1642
Grizzly G0584
Hearing Protection
Jul 16th, 2016 at 5:11pm
 
Most safety discussion have turners talking about dust protection and face protection.
How many of you regularly use/wear hearing protection while working with power tools?
It seems to be a less talked about subject.
I wear hearing protection when using just about any of my power tools. I use a pair similar to Multimedia File Viewing and Clickable Links are available for Registered Members only!!  You need to Login or Register
Back to top
  
 
IP Logged
 
Register To Remove Ads
Louie Powell
WR Devotee
*****
Offline



Posts: 658

Saratoga Springs, New York, USA
Saratoga Springs
New York
USA

Gender: male

PSI 12" Turncrafter Commander
Re: Hearing Protection
Reply #1 - Jul 16th, 2016 at 7:01pm
 
I wear hearing protection outdoors when mowing the lawn, using a chain saw, or using a leaf blower.† I generally† use protection in the shop when using the table saw.† I usually don't use hearing protection when turning - because that's not nearly as noisy, and because I need to listen for odd noises that indicate that the piece is about to fly off the lathe.
Back to top
« Last Edit: Jul 16th, 2016 at 7:02pm by Louie Powell »  

Louie
 
IP Logged
 
Joe Penn
WR Patron
******
Offline


WR Rocks!

Posts: 164

Canton, Georgia, USA
Canton
Georgia
USA

Gender: male

Jet 1642 EVS
Re: Hearing Protection
Reply #2 - Jul 16th, 2016 at 7:32pm
 
I have a hearing problem and I wear hearing aids; if I use anything other than the lathe -dust collector, power sander- I turn my aids off use a similar set of earmuffs. If I just run the vacuum to pick up chips or the band saw, I donít wear the muffs, but I do turn the aids off. 

Outdoors with the lawnmower, chainsaw, or leaf blower, I turn the aids off use earmuffs.

The aids off are essentially plugs, but not enough to completely block noise. 

I don't use anything to cover my ears and I leave aids on if I'm just turning or sharpening.

I also shoot a bit and I have a custom set of ear plugs that blocks noise that I wear when I shoot.
Back to top
  

Neither famous, nor infamous.
 
IP Logged
 
Don Stephan
WR Addict
*****
Offline


WR Rocks!

Posts: 1,449

Cincinnati, Ohio, Ohio, USA
Cincinnati, Ohio
Ohio
USA

Gender: male
Re: Hearing Protection
Reply #3 - Jul 16th, 2016 at 7:40pm
 
When using the table saw, jointer, planer (all of which are also using the dust collector), the miter saw, circular saw, chain saw (outside) I'm wearing a pair of Stihl ear muffs because they were easy to find locally and I had confidence they work.
Back to top
  
WWW  
IP Logged
 
Steve Arnold
Active Member
***
Offline


WR Rocks!

Posts: 134

Burbank, California, USA
Burbank
California
USA

Gender: male

Jet 1640EVS
Re: Hearing Protection
Reply #4 - Jul 16th, 2016 at 9:35pm
 
I do wear hearing protection when I turn and it's not because of the lathe, but because the suction from my dust collector hose is so noisy.

I don't want to look back ten years from now and have to say to myself I wish I had taken better care of my hearing.

These muffs have turned out to be a very good investment for me.

Multimedia File Viewing and Clickable Links are available for Registered Members only!!  You need to Login or Register
Back to top
  
 
IP Logged
 
Ron Sardo
WR Administrator
WR Patron
*****
Offline


Chief cook and bottle
washer

Posts: 9,263

Drums, Pennsylvania, USA
Drums
Pennsylvania
USA


PM 3520
Re: Hearing Protection
Reply #5 - Jul 17th, 2016 at 8:04am
 
I'm still using my old Trition that has built in hearing protection.
Back to top
  

Multimedia File Viewing and Clickable Links are available for Registered Members only!!  You need to Login or Register
WWW  
IP Logged
 
Joe Penn
WR Patron
******
Offline


WR Rocks!

Posts: 164

Canton, Georgia, USA
Canton
Georgia
USA

Gender: male

Jet 1642 EVS
Re: Hearing Protection
Reply #6 - Jul 17th, 2016 at 10:18am
 
Steve Arnold wrote on Jul 16th, 2016 at 9:35pm:
I don't want to look back ten years from now and have to say to myself I wish I had taken better care of my hearing.


As someone with a hearing problem I would recommend that course of action. I think I lost part of my hearing when I was in the Army. I was in a mortar squad and our hearing protection was the tips of our index fingers.† I think the military now protects I members from future hearing loss.†

After I was out of the Army I did nothing to protect my hearing because I didnít think about it and I was unaware of the potential for hearing loss. Now I do what I can to protect what I have left.

Hearing loss can be expensive. I think I have spent in the neighborhood of $15K on aids and devices since I realized I had a loss and actually did something about it.

But, it isnít all bad. I have a program that kills all input and basically turns the aids into plugs. I often eat lunch alone and if Iím sitting near a loud crowd or some obnoxious cell phone yacker I can select that program and sit in peace.

Back to top
  

Neither famous, nor infamous.
 
IP Logged
 
Dave Gill
WR Champion
*****
Offline


Good People - Good Info!

Posts: 346

Hayward, California, USA
Hayward
California
USA

Gender: male

Jet 1220VS
Jet 1642EVS-2
Re: Hearing Protection
Reply #7 - Jul 17th, 2016 at 7:04pm
 
While in the Navy I spent a couple thousand hours riding in a helicopter underneath 2 jet engines and the main transmission. We did ware helmets with pretty good earphones and mike so we could communicate with other members of the flight crew and listen to external radio traffic. The earphones were pretty good at muffling the outside noise and, on top if all, I was required to operate some airborne sonar equipment from time to time.

The residual from all this is that I have a high pitch buzzing in my ears. I got tested for hearing loss and was told that the buzzing and whatever hearing loss that I do have is due to age and is not something that needs correction.

I do not wear hearing protection in the shop or outside because most of the time I do not consider the noise from my electric leaf suxxer or chain saw to be too loud - I have a battery powered lawn mower and trimmer.

I do have a pair of noise cancelling ear protectors that I use when target shooting - maybe I should start using those when using the leaf suxxer (don't like leaf blowers) and chain saw.
Back to top
  

I know I ask perfection of a quite imperfect world...and fool enough to think that's what I'll find!
 
IP Logged
 
Register To Remove Ads
Ed Weber
WR Global Moderator
WR Patron
*****
Offline



Posts: 4,701

Wilton, California, USA
Wilton
California
USA

Gender: male

JET 1642
Grizzly G0584
Re: Hearing Protection
Reply #8 - Jul 17th, 2016 at 7:30pm
 
Some additional information for those interested
Multimedia File Viewing and Clickable Links are available for Registered Members only!!  You need to Login or Register
Multimedia File Viewing and Clickable Links are available for Registered Members only!!  You need to Login or Register
Work safe
Back to top
  
 
IP Logged
 
Bob_Macgregor
Senior Member
****
Offline


Round wood.  Sharp steel.

Posts: 454

Gender: male
Re: Hearing Protection
Reply #9 - Jul 18th, 2016 at 8:21am
 
"If you need to raise your voice to be heard an arm's length away, the noise is probably loud enough to damage your hearing."   

I've been in some restaurants and bars where you need to shout to be heard by somebody sitting next to you.

Back to top
  
 
IP Logged
 
Dave Gill
WR Champion
*****
Offline


Good People - Good Info!

Posts: 346

Hayward, California, USA
Hayward
California
USA

Gender: male

Jet 1220VS
Jet 1642EVS-2
Re: Hearing Protection
Reply #10 - Jul 18th, 2016 at 9:18am
 
Bob - that sure sounds like a good time to have a set of noise cancelling ear phones on.
Back to top
  

I know I ask perfection of a quite imperfect world...and fool enough to think that's what I'll find!
 
IP Logged
 
Bob_Macgregor
Senior Member
****
Offline


Round wood.  Sharp steel.

Posts: 454

Gender: male
Re: Hearing Protection
Reply #11 - Jul 19th, 2016 at 8:13am
 
Dave Gill wrote on Jul 18th, 2016 at 9:18am:
Bob - that sure sounds like a good time to have a set of noise cancelling ear phones on.



It would be especially good if they could make them small enough that my wife wouldn't notice I was wearing them... Wink
Back to top
  
 
IP Logged
 
Tom Coghill
WR Addict
*****
Offline


Turning, when I am done
with my chores.

Posts: 1,045

Anchorage, Alaska, USA
Anchorage
Alaska
USA

Gender: male

Oneway 2436, 3 HP 220V
Re: Hearing Protection
Reply #12 - Jul 19th, 2016 at 10:16am
 
I wear hearing protection (headphone type) whenever I am using the dust collector, any powered tool ( drill motor, etc.) and sometimes I forget they are on so it may carry over into other areas...† however for normal work (roughing, coring, hollow form work, etc.) I usually don't wear hearing protection.† I do, however, usually listen to music using ear buds when doing non-powered work.† Thumbs Up
Back to top
« Last Edit: Jul 19th, 2016 at 10:17am by Tom Coghill »  
 
IP Logged
 
Tim Hyatt
WR Supporter
*****
Offline


WR Rocks!

Posts: 624

Charleston WV, West Virginia, USA
Charleston WV
West Virginia
USA

Gender: male
Re: Hearing Protection
Reply #13 - Jul 21st, 2016 at 10:09am
 
I have some high-end loss from my time on the flightline (jet turbines are kinda notorious for causing some losses) so i've always been aware of the noise levels in my shop.

As small as my shop is, and walls of cinderblock, if i run the dust collector at all, I need some sort of hearing protection.† Typically, i wear a headset with a radio built into it.† that way, i can block out the drone of the blower and other machinery, and hear my favorite tunes clearly.† The set I have, has a socket to plug in an mp3 player, and routing the cord down inside my turning jacket keeps it from being a snag hazard.† They weren't even all that expensive....

biggest hassle i have with them is they don't quite fit easily under my faceshield, so they have to kinda "cram" under to be properly in place.  it's more of an annoyance than an outright problem....
Back to top
« Last Edit: Jul 21st, 2016 at 10:10am by Tim Hyatt »  
 
IP Logged
 
Ralph Fahringer
WR Patron
******
Offline


I'm the "Burly" Man!!

Posts: 677

Ellsworth, Maine, USA
Ellsworth
Maine
USA

Gender: male

PM3520b
Re: Hearing Protection
Reply #14 - Jul 21st, 2016 at 10:45am
 
I'm sure i have  hearing loss from the many, many concerts I attended in my youth!!

When you manage to get close enough to the stage of a Rolling Stones concert that you can see the speaker cones vibrate, odds are that you have hearing loss!!

I remember a concert: J Giles, King Crimson and Humble Pie... at the time the 3 loudest bands out there all at the Spectrum in Philadelphia which in itself had the worst acoustics of any place.

They tell me i had a great time... I don't remember! Shocked Shocked Thumbs Up

I use ear protection when i'm using my chop saw & dust collector at the frame shop and at my shop at home when I have the shop vac on to collect the sanding dust at the lathe.

No sense losing what's left! Thumbs Up

Back to top
  

Originality is the art of concealing your source.
 
IP Logged
 
Pages: 1 2 
Send Topic Print