Woodturner's Resource
Woodturner's Resource  
  Featured Artist    Websites   Support Wr
Tutorials, Projects & Tips   Event Calendar   Tool and Book Store
  Home Page Forum HelpSearch Map TPT Resources LoginRegister
 
Page Index Toggle Pages: 1
Send Topic Print
Stave Bowl (Read 279 times)
 
Bruce Kamp
Active Member
***
Offline


WR Rocks!

Posts: 196

Stave Bowl
Nov 17th, 2017 at 10:28pm
 
Getting to enjoy stave bowl turning. This is walnut and jatoba. Finished with danish oil and lacquer. Buffed using Beall system.
Comments welcome.
Back to top
« Last Edit: Nov 17th, 2017 at 10:30pm by Bruce Kamp »  
 
IP Logged
 
Register To Remove Ads
Len Mullin
Active Member
***
Offline


WR Rocks!

Posts: 137

Miramichi, New Brunswick, Canada
Miramichi
New Brunswick
Canada

Re: Stave Bowl
Reply #1 - Nov 22nd, 2017 at 11:18pm
 
Bruce, I love it,it's a gorgeous bowl. What are it's dimensions,  can't tell from  the picture.
Len
Back to top
  
 
IP Logged
 
Edgar Sims
Junior Member
*
Offline


WR Rocks!

Posts: 45

peoria, Arizona, USA
peoria
Arizona
USA

Gender: male
Re: Stave Bowl
Reply #2 - Nov 23rd, 2017 at 1:24am
 
Nice! I like that. Could you give us a bit more information please? Size of bowl, number of wedges, size of wedges?
Thanks, Ed
Back to top
  
 
IP Logged
 
ALLAN KUNTZ
Full Member
**
Offline


WR Rocks!

Posts: 83

gull lake, Saskatchewan, Canada
gull lake
Saskatchewan
Canada

Gender: male
Re: Stave Bowl
Reply #3 - Nov 23rd, 2017 at 7:29pm
 
Nice looking bowl. Along with the above questions could you show a picture of your sled
Al
Back to top
  
 
IP Logged
 
Bruce Kamp
Active Member
***
Offline


WR Rocks!

Posts: 196

Re: Stave Bowl
Reply #4 - Nov 26th, 2017 at 3:51pm
 
The bowl measures 4-1/2" H X 11" W. It has three rings of 16 segments each. The middle ring consists of 4" long staves with 1/8" walnut between.
I will include pictures of the sled I used plus a copy of the cut list that is produced by The Segmented Project Planner. This is software produced by Bill Kandler which gives me all the necessary measurements including the angle settings for the compound cut of the staves.
I apologize for the crude illustration of the sled. The key observations here is the adjustable miter fence, the setting of 90 degrees for the stop block and the use of a cutoff to set position for the second cut of each stave.
I used a Wixey angle gauge and a digital protractor to set the angles of the blade and the miter fence respectively.
I have found that this setup works well for me. I am sure it can be improved on and would be interested in any comments.

Back to top
  
 
IP Logged
 
Bruce Kamp
Active Member
***
Offline


WR Rocks!

Posts: 196

Re: Stave Bowl
Reply #5 - Nov 26th, 2017 at 3:51pm
 
Second illustration of stave sled
Back to top
  
 
IP Logged
 
Bruce Kamp
Active Member
***
Offline


WR Rocks!

Posts: 196

Re: Stave Bowl
Reply #6 - Nov 26th, 2017 at 3:52pm
 
Cut list from SPP
Back to top
  
 
IP Logged
 
ALLAN KUNTZ
Full Member
**
Offline


WR Rocks!

Posts: 83

gull lake, Saskatchewan, Canada
gull lake
Saskatchewan
Canada

Gender: male
Re: Stave Bowl
Reply #7 - Nov 26th, 2017 at 8:01pm
 
thanks Bruce
Back to top
  
 
IP Logged
 
Register To Remove Ads
Edgar Sims
Junior Member
*
Offline


WR Rocks!

Posts: 45

peoria, Arizona, USA
peoria
Arizona
USA

Gender: male
Re: Stave Bowl
Reply #8 - Nov 26th, 2017 at 9:27pm
 
Thanks, Bruce
When you have time I'd appreciate a picture of the bowl showing the rim where the middle and upper rings flow together.
Ed
Back to top
  
 
IP Logged
 
Arlin Eastman
Active Member
***
Offline


Born in the USA

Posts: 215

Council Bluffs, Iowa, USA
Council Bluffs
Iowa
USA

Gender: male

PM3520B
Re: Stave Bowl
Reply #9 - Nov 27th, 2017 at 2:41am
 
Bruce

Well done, Well done.  Thumbs Up
Back to top
  

It is always the right time; To do the right thing
 
IP Logged
 
Grant Wilkinson
WR Supporter
*****
Offline



Posts: 439

Ottawa, Ontario, Canada
Ottawa
Ontario
Canada

Re: Stave Bowl
Reply #10 - Nov 27th, 2017 at 11:54am
 
Nicely done, Bruce.
Back to top
  

Grant Wilkinson
Ottawa ON
 
IP Logged
 
Bruce Kamp
Active Member
***
Offline


WR Rocks!

Posts: 196

Re: Stave Bowl
Reply #11 - Nov 27th, 2017 at 12:29pm
 
Ed,
Not quite sure if this is what you were looking for. The process I used was to first make the stave section, including turning it round. Then I measured for the top and bottom rings. I made them larger than necessary because I wanted to be able to cut back to the actual design I was after.
The top ring is simply end grain glued to side grain. The bottom ring is mortised into the bottom of the stave ring. So, there is still some end grain to side grain gluing but is fortified by the mortise and tenon.
I hope these help.
Back to top
  
 
IP Logged
 
Bruce Kamp
Active Member
***
Offline


WR Rocks!

Posts: 196

Re: Stave Bowl
Reply #12 - Nov 27th, 2017 at 12:30pm
 
Pic showing outside detail.
Back to top
  
 
IP Logged
 
Edgar Sims
Junior Member
*
Offline


WR Rocks!

Posts: 45

peoria, Arizona, USA
peoria
Arizona
USA

Gender: male
Re: Stave Bowl
Reply #13 - Nov 27th, 2017 at 9:05pm
 
Thanks, Bruce
Thats whaat I wanted to see. NNow to build the sled.
Thanks again
Ed
Back to top
  
 
IP Logged
 
Bruce Kamp
Active Member
***
Offline


WR Rocks!

Posts: 196

Re: Stave Bowl
Reply #14 - Nov 27th, 2017 at 10:28pm
 
Ed,
Let me know how it works out for you.
Bruce
Back to top
  
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print