Woodturner's Resource
Woodturner's Resource  
  • Featured Artist    • Websites   Support Wr
Tutorials, Projects & Tips   • Event Calendar   • Tool and Book Store
  Home Page Forum HelpSearch Map TPT Resources LoginRegister
 
Page Index Toggle Pages: 1
Send Topic Print
Chuck choice (Read 208 times)
 
Ken Lundrigan
WR Noob
Offline


WR Rocks!

Posts: 2


Have 2    king Canada mega lathe  10x16
And craftex
Chuck choice
Jul 8th, 2018 at 12:16am
 
hello everyone. new too woodturning. bought a king canada  mega lathe( not sure where mega comes into play lol) but price was right brand new still had grease on it for 150 canadian. finally got all set up and wife decided she like too turn. ok well bought another lathe again great deal still in grease and package wrap for 400 canadian and its a craftex. im in the market for a better chuck and of course money is not unlimited like most i have a budget. ive read and seen reviews of 2 chucks. Nova 3G and PSI CSC2000C Barracuda. because i have a budget both these items are listed on amazon. my question is can i get some feed back on these 2 chucks and also for a beginner if you have any other better suggestions i welcome the replys. really like too get something that is self centering. thanks everyone
Back to top
  
 
IP Logged
 
Bill Neff
WR Addict
*****
Offline


WR Rocks!

Posts: 688

Barronett, Wisconsin, USA
Barronett
Wisconsin
USA

Gender: male
Re: Chuck choice
Reply #1 - Jul 8th, 2018 at 9:30am
 
I have a Nova and a PSI chuck.  Personally I prefer the nova. It has dovetail jaws and holds blanks much better than the PSI chuck.
Back to top
  

Some people are like slinkies... totally worthless but it puts a smile on your face when you push them down the stairs.
WWW  
IP Logged
 
George Stratton
Active Member
***
Offline


WR Rocks!

Posts: 148

Gender: male

Old Delta 12" 46-701 in great condition. Had it about 20+ years and turned 1 part.
Re: Chuck choice
Reply #2 - Jul 8th, 2018 at 1:16pm
 
I also have the G3 Nova Ken and fairly new to wood turning and love the chuck. Holds everything I have turned so far including 10 inch bowls and lots of peppermills. Made a set of plywood Cole jaws for it and they work well too.
Back to top
  
 
IP Logged
 
Ed Weber
WR Administrator
WR Patron
*****
Offline



Posts: 5,284

Wilton, California, USA
Wilton
California
USA

Gender: male

JET 1642
Grizzly G0584
Re: Chuck choice
Reply #3 - Jul 8th, 2018 at 1:42pm
 
Out of the two you mentioned, I would opt for the Nova G3.
You have a wide range of jaws available, it is a good bang for the buck.
Back to top
  
 
IP Logged
 
Don Stephan
WR Addict
*****
Offline


WR Rocks!

Posts: 1,688

Cincinnati, Ohio, Ohio, USA
Cincinnati, Ohio
Ohio
USA

Gender: male
Re: Chuck choice
Reply #4 - Jul 8th, 2018 at 2:16pm
 
Welcome to the forum, I think you will be very pleasantly surprised by the friendliness and level of support and helpful information found here.

Your profile doesn't indicate where you live - another great source of information and assistance can be a local wood turning group.  Often members are quite willing to share experience with different lathes, tools, and techniques.  Some groups also offer classes and demonstrations.  I don't know the specifics of it, but I understand there is a listing somewhere on the web site of the American Association of Woodturners (AAW), identifying all local turning groups affiliated with the AAW.
Back to top
  
WWW  
IP Logged
 
Ken Lundrigan
WR Noob
Offline


WR Rocks!

Posts: 2


Have 2    king Canada mega lathe  10x16
And craftex
Re: Chuck choice
Reply #5 - Jul 8th, 2018 at 4:53pm
 
oh great thanks everyone looks like the nova will be the choice. also i live in alberta canada. right now just practicing on the wood i can get in this area. Usually cut down dead standing  spruce, popular, birch and jack pine.
Back to top
  
 
IP Logged
 
Don Stephan
WR Addict
*****
Offline


WR Rocks!

Posts: 1,688

Cincinnati, Ohio, Ohio, USA
Cincinnati, Ohio
Ohio
USA

Gender: male
Re: Chuck choice
Reply #6 - Jul 9th, 2018 at 5:48am
 
Be very attentive to bowl blanks from dead trees.  As wood dries it develops shrinkage cracks, including undrr the bark.  During periods of higher humidity the wood can absorb moisture and expand, making the cracks less noticeable.  Check the wood constantly for cracks.  After such an experience with a standing dead tree I won't take the risk of wood flying apart on the lathe.  And at minimum wear an impact rated full face shield and stay out of the "line of fire" a chunk of wood would travel.  Reed Gray aka Robo Hippy has a YouTube video on this.
Back to top
  
WWW  
IP Logged
 
John Grace
WR Addict
*****
Offline


Everyone needs a good
wingman...

Posts: 708

Bel Air, Maryland, USA
Bel Air
Maryland
USA

Re: Chuck choice
Reply #7 - Jul 11th, 2018 at 3:36pm
 
Ken Lundrigan wrote on Jul 8th, 2018 at 4:53pm:
Usually cut down dead standing  spruce, popular, birch and jack pine.


Be aware that some woods are simply too soft to turn effectively.  Practice and learn but don't be surprised if some species simply don't give you the end product your looking for or expecting.
Back to top
  

“If history were taught in the form of stories, it would never be forgotten.”  Kipling
 
IP Logged
 
James Saxinger
Senior Member
****
Offline


WR Rocks!

Posts: 354

Saskatoon, Saskatchewan, Canada
Saskatoon
Saskatchewan
Canada

Gender: male

NOVA 2024
GI 25-200
Re: Chuck choice
Reply #8 - Yesterday at 12:46pm
 
Hey Ken, I sent you a PM, with some info for a G3 chuck

Cheers
James
Back to top
  
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print