Woodturners Resource en-us http://www.woodturnersresource.com/wrphotopost Thu, 20 Sep 2018 09:46:48 +0000 PhotoPost Pro 8.0 60 Hackberry (?) Natural Edge view #2 <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10561&amp;title=hackberry-natural-edge-view-2&amp;cat=500"><img class="imgborder" title="041_600_x_448_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/041_600_x_448_.jpg" alt="041_600_x_448_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: After several months away from the lathe I was able to pump this one out. About 6&quot; x 2.5&quot; with all its bark intact. It is about 1/4&quot; thick from top to bottom. Rolls around to a 2&quot; depression on the bottom for a foot. Has 1 application of walnut oil rubbed in at this point. I'll add another application or two then decide whether or not to buff. May well not since the inside is so tight. All C&amp;C appreciated.<br /><br />2 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10561&title=hackberry-natural-edge-view-2&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10561&title=hackberry-natural-edge-view-2&cat=500 Sat, 25 Aug 2012 03:40:48 +0000 Hackberry (?) Natural Edge <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10560&amp;title=hackberry-natural-edge&amp;cat=500"><img class="imgborder" title="040_600_x_448_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/040_600_x_448_.jpg" alt="040_600_x_448_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: After several months away from the lathe I was able to pump this one out. About 6&quot; x 2.5&quot; with all its bark intact. It is about 1/4&quot; thick from top to bottom. Rolls around to a 2&quot; depression on the bottom for a foot. Has 1 application of walnut oil rubbed in at this point. I'll add another application or two then decide whether or not to buff. May well not since the inside is so tight. All C&amp;C appreciated.<br /><br />1 comment http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10560&title=hackberry-natural-edge&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10560&title=hackberry-natural-edge&cat=500 Sat, 25 Aug 2012 03:39:45 +0000 2011 Secret Santa Ornament <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10258&amp;title=2011-secret-santa-ornament&amp;cat=694"><img class="imgborder" title="IMG-20111126-00358.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/694/thumbs/IMG-20111126-00358.jpg" alt="IMG-20111126-00358.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Sea Urchin ornament. This is a first for me. Over height is 3 1/2&quot; tall. The width is approximately 1 3/4&quot;. Cap is turned from Manzanita (sp). The icicle is maple. Finished with a dip into GF's Woodturners Finish. Some have been asking about weight. I'm sorry but I have no way of weighing these. It is barely noticeable in your hand. All comments and critiques are welcome.<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10258&title=2011-secret-santa-ornament&cat=694 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10258&title=2011-secret-santa-ornament&cat=694 Sun, 27 Nov 2011 12:59:27 +0000 2011 Fall Goblet C&amp;T <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10195&amp;title=2011-fall-goblet-c-amp-t&amp;cat=693"><img class="imgborder" title="Fall_2011_C_T_Goblet.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/693/thumbs/Fall_2011_C_T_Goblet.jpg" alt="Fall_2011_C_T_Goblet.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: For your approval: 9 1/2&quot; tall Cup - 2 1/2&quot; wide x 1 3/4&quot; tall Stem - 7 1/2&quot; tall x ~1/8&quot; slim Base - 2&quot; wide Wood is East Indian Rosewood Finish - GF Woodturners Finish Loads of fun to turn since I haven't turned a goblet in a long time. Thought I had some negative pressure on the stem as I turned it, but the further I got from the tail stock, the more vibration I got. No problems though, I got through it without breaking it. This was the first for the Woodturners finish. I think I like it. A couple of more time using it and I'll be able to tell more about it. Questions, comments, and critiques are welcome always. Sorry about the cruddy pic. I'll try to get a better one when I get back home in a few days. 8^)<br /><br />9 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10195&title=2011-fall-goblet-c-amp-t&cat=693 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10195&title=2011-fall-goblet-c-amp-t&cat=693 Mon, 14 Nov 2011 05:58:16 +0000 Hackberry Nightmare bottom <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10016&amp;title=hackberry-nightmare-bottom&amp;cat=500"><img class="imgborder" title="Beaast_f_.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Beaast_f_.JPG" alt="Beaast_f_.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Just wanted you to see what the bottom looks like. See the wolf? On the right side facing the center of the bowl.<br /><br />1 comment http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10016&title=hackberry-nightmare-bottom&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10016&title=hackberry-nightmare-bottom&cat=500 Wed, 07 Sep 2011 04:27:23 +0000 Hackberry Nightmare <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10015&amp;title=hackberry-nightmare&amp;cat=500"><img class="imgborder" title="Beast_c_.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Beast_c_.JPG" alt="Beast_c_.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: 9&quot; wide by 2 1/2&quot; tall. Gave me a fit turning it. Was intending to leave most of the bark on the outside, but the biggest part of it went flying when I touched the gouge to it. What I ended up with left me little wood to turn the inside. Pretty thin over the bark of the outside. Rest is pretty thick. Bark even cut into the edge of the rim on one side. There is a limb inclusion on the rim opposite the bark edge. At least it polished up nice. On the bottom there is a wolf starting to sneak up on something. One of my very few nightmares other than Chuck in his turning hat. Any comments or critiques wanted and welcomed.<br /><br />3 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10015&title=hackberry-nightmare&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10015&title=hackberry-nightmare&cat=500 Wed, 07 Sep 2011 04:24:56 +0000 Marachino Cherry <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10014&amp;title=marachino-cherry&amp;cat=500"><img class="imgborder" title="Beauty_e_.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Beauty_e_.JPG" alt="Beauty_e_.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Turned from Cherry (duh). 8 1/2&quot; wide by 3 1/2&quot; tall. Sprayed inside and out with red colored water based Lacquer. Nearly buffed through the outside. Did on the inside. Must not have been cured long enough because the inside lacquer came off in one huge sheet. Re-sanded, leaving only a remnant of the red color. Outside is slick as it can be. Still has a few marks in the lacquer though from the buffing too early. Any and all comments and critiques welcome.<br /><br />9 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10014&title=marachino-cherry&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=10014&title=marachino-cherry&cat=500 Wed, 07 Sep 2011 04:19:19 +0000 C_T_Summer2011a <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9954&amp;title=c-t-summer2011a&amp;cat=687"><img class="imgborder" title="C_T_Summer2011a.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/687/thumbs/C_T_Summer2011a.jpg" alt="C_T_Summer2011a.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Just another view of the same piece. See other pic for description and dimensions. http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9954&title=c-t-summer2011a&cat=687 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9954&title=c-t-summer2011a&cat=687 Sat, 06 Aug 2011 05:05:58 +0000 Summer 2011 C&amp;T <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9953&amp;title=summer-2011-c-amp-t&amp;cat=687"><img class="imgborder" title="C_T_Summer_2011.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/687/thumbs/C_T_Summer_2011.jpg" alt="C_T_Summer_2011.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: This is my entry into this particular C&amp;T Turned from a branch off a hickory tree that came off our church property. This particular tree was cut up when it came down during the ice storm of 2009. The day after the storm I went out to survey the damage through our woods. As another member and I walked across the property it sounded as if shots were being fired. Other than these &quot;pops,&quot; it was eerily silent. A really spooky feeling, so we decided the smarter thing to do was to leave before we got hit with something, like a tree. Thickness is something just less than 1/8&quot;. Length is 8&quot;. With is 3&quot; on the ends, 2 3/4&quot; in the center. Height is 3&quot; at the tips. There is no foot, just a &quot;smooth&quot; bottom. Finish is Velvit Oil that I will buff out just before I package it up for mailing. Q, C, and C welcomed. BTW, are we beginning to see a theme or what?<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9953&title=summer-2011-c-amp-t&cat=687 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9953&title=summer-2011-c-amp-t&cat=687 Sat, 06 Aug 2011 05:04:27 +0000 2 Ball opened. <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9902&amp;title=2-ball-opened&amp;cat=500"><img class="imgborder" title="2_Ball_open.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/2_Ball_open.jpg" alt="2_Ball_open.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Just thought some of you would like to see a view of the box with the lid off.<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9902&title=2-ball-opened&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9902&title=2-ball-opened&cat=500 Wed, 06 Jul 2011 04:11:00 +0000 &quot;2 Can Be As Bad as 1, ...&quot; <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9901&amp;title=quot-2-can-be-as-bad-as-1-quot&amp;cat=500"><img class="imgborder" title="2_Ball.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/2_Ball.jpg" alt="2_Ball.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Another pool ball box inspired by Paul Porter. I said with the 13 that LOML was suggesting more of a knob instead of the tall finial. I also said that she's usually right. Not sure I don't agree with her, again. It may just be my finials, but I just like the knob better in general. This was #3 in the series and I think the best of the bunch. I do have one question I'm going to ask Paul about, but the process is getting better all the time. Chuck is working great. C&amp;C welcomed.<br /><br />4 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9901&title=quot-2-can-be-as-bad-as-1-quot&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9901&title=quot-2-can-be-as-bad-as-1-quot&cat=500 Wed, 06 Jul 2011 04:10:00 +0000 Un/Lucky Combination <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9900&amp;title=un-lucky-combination&amp;cat=500"><img class="imgborder" title="Un_Lucky.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Un_Lucky.jpg" alt="Un_Lucky.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Here are the two side by side. I haven't done enough of these to have settled into a pattern so that they come out just alike. 2 down, 14 to go. This is fun! C&amp;C welcomed.<br /><br />4 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9900&title=un-lucky-combination&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9900&title=un-lucky-combination&cat=500 Tue, 05 Jul 2011 05:39:15 +0000 13 Ball <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9899&amp;title=13-ball&amp;cat=500"><img class="imgborder" title="13_Ball_Close_up.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/13_Ball_Close_up.jpg" alt="13_Ball_Close_up.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: This is the 2nd in the series. I love making these little boxes. Not sure how it happened, but the lid has a bit of a snap fit. Had some trouble with this one and had to remake my chuck. Not so sure that it isn't much better now. In fact, I modified it after I completed this one. Next one should work out even better. Looking forward to getting started on it. Anyway, sanded through all the micro-mesh grits (wet) and polished with Hut's plastic glaze. Ended up holding it against the buffing wheel too to finish up the section that the chuck didn't allow me to get to. Should be fixed now. Finial is Black Locust with a coat of Minwax floor finish on it. LOML is suggesting just a knob on the next one. May have to give it a shot just to appease her. Who knows, she's usually right. We'll see. C&amp;C welcomed.<br /><br />1 comment http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9899&title=13-ball&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9899&title=13-ball&cat=500 Tue, 05 Jul 2011 05:32:53 +0000 7 Ball in the Corner <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9890&amp;title=7-ball-in-the-corner&amp;cat=500"><img class="imgborder" title="Blackberry_downloads_157.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Blackberry_downloads_157.jpg" alt="Blackberry_downloads_157.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Just another view of the same piece.<br /><br />9 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9890&title=7-ball-in-the-corner&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9890&title=7-ball-in-the-corner&cat=500 Wed, 22 Jun 2011 06:14:01 +0000 7 Ball in the Corner <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9889&amp;title=7-ball-in-the-corner&amp;cat=500"><img class="imgborder" title="Blackberry_downloads_158.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Blackberry_downloads_158.jpg" alt="Blackberry_downloads_158.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Yep, it's a 7 ball. A friend asked if I painted it too. No paint on this at all. While in Phoenix, I had the honor of seeing Paul Porter turn one of these. Learned enough that I figured I could turn one myself. As you can see, the experiment was successful. Improvements will be made for the next one too. Box is hollowed and the lid is from the same ball. Finial is Box Elder. Wet sanded through the micromesh grits and polished with Hut High Gloss Polish for Plastics. Finial treated with EEE and Shellawax. Questions, Comments and Critiques welcome.<br /><br />12 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9889&title=7-ball-in-the-corner&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9889&title=7-ball-in-the-corner&cat=500 Wed, 22 Jun 2011 06:12:56 +0000 Hackberry Vase <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9888&amp;title=hackberry-vase&amp;cat=500"><img class="imgborder" title="Finished_Vase.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Finished_Vase.jpg" alt="Finished_Vase.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Turned for a fun project challenge that was offered in the forum. Wood is green hackberry that was cut down in the back of my dad's shop. About 7&quot; tall, 3&quot; diameter. Bottom bulb is hollow to about 1/4&quot;. Stem is thinner with a center hole of 3/8&quot;. Obviously too narrow to be hollowed from the top. Finish is a coat of homebrew that I couldn't begin to tell you what it is, and a coat of Velvit Oil rubbed in by hand until dry to touch. 24 hours to dry and then buffed with Tripoli, White Diamond, and Johnson's Floor wax. All comments, questions, and critiques welcome.<br /><br />2 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9888&title=hackberry-vase&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9888&title=hackberry-vase&cat=500 Wed, 22 Jun 2011 06:06:50 +0000 Maple Burl <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9855&amp;title=maple-burl&amp;cat=500"><img class="imgborder" title="Hardinsburg-20110530-00069.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Hardinsburg-20110530-00069.jpg" alt="Hardinsburg-20110530-00069.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: I actually turned this piece about 2 weeks ago on Big Blue, but just this evening I got the final wax on it. Measures about 9 3/4&quot; x 2, finished with Velvit Oil, buffed, and waxed. This one is destined as a gift to the people who sold me the lathe. I look forward to the day I can present it to them. Questions, Comments, and Critiques welcome and desired.<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9855&title=maple-burl&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9855&title=maple-burl&cat=500 Tue, 31 May 2011 03:17:11 +0000 Hackberry <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9854&amp;title=hackberry&amp;cat=500"><img class="imgborder" title="Hardinsburg-20110530-00064.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Hardinsburg-20110530-00064.jpg" alt="Hardinsburg-20110530-00064.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Did some serious work around the house and yard this morning. So to reward myself I turned this little friend. Hackberry (I think) around 5 1/4 x 2 3/8&quot; Finish is Velvit oil that will be buffed out and waxed in a few days. Questions and Comments requested and desired.<br /><br />10 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9854&title=hackberry&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9854&title=hackberry&cat=500 Tue, 31 May 2011 02:54:08 +0000 Pear Hollow Form <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9723&amp;title=pear-hollow-form&amp;cat=500"><img class="imgborder" title="Pear_Hollow_Form_111.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Pear_Hollow_Form_111.jpg" alt="Pear_Hollow_Form_111.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: This hollow form is turned from a piece of pear with a walnut collar. It was hollowed with the new Easy Wood hollowing tool for the Easy Tool contest. I was so amazed at how well it worked for me. As best I could tell there had been around 12 pieces hollowed out with it and still the cutter had not been turned. I was pretty amazed at how fast I had to stop to empty out the shavings. 4&quot; wide x 2 1/2&quot; tall Finish is Velvit oil which will be buffed. Questions, Comments, and Critiques are always welcome.<br /><br />5 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9723&title=pear-hollow-form&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9723&title=pear-hollow-form&cat=500 Tue, 22 Feb 2011 04:16:10 +0000 Commissioned Wall Street II <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9720&amp;title=commissioned-wall-street-ii&amp;cat=500"><img class="imgborder" title="Black_Chacte_211_640_x_480_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Black_Chacte_211_640_x_480_.jpg" alt="Black_Chacte_211_640_x_480_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Wall Street II, Gun Metal and Gold, Black Chakte. Sanded through all grits of micro-mesh. Finished with Myland's Friction Finish. Done by request for customer to give as a retirement gift. Love these commissions. I love doing these for folks for several reasons. They give me an excuse to turn. They cause me to look for different woods I can use for pens all the time. They put a few dollars in the tool account. Best of all, they often lead to other sales. Then all the fun begins again. YAHOO! As usual, questions, comments, and critiques are always welcome.<br /><br />10 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9720&title=commissioned-wall-street-ii&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9720&title=commissioned-wall-street-ii&cat=500 Sun, 13 Feb 2011 03:57:59 +0000 Post Christmas Ornament <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9636&amp;title=post-christmas-ornament&amp;cat=500"><img class="imgborder" title="DSCF0019_600_x_450_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/DSCF0019_600_x_450_.jpg" alt="DSCF0019_600_x_450_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: I turned the finial and globe. Dad turned the drop. Both finial and drop are rosewood. The globe is tiger maple. Hollowed with a tool I made from a 16d nail stuck into a pecan pen blank. Measures about 3 1/4&quot; top to bottom, about 1 1/4&quot; diameter. Finish is Velvit oil. Critiques and Comments requested.<br /><br />1 comment http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9636&title=post-christmas-ornament&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9636&title=post-christmas-ornament&cat=500 Tue, 28 Dec 2010 04:03:05 +0000 2010 Christmas C&amp;T <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9517&amp;title=2010-christmas-c-amp-t&amp;cat=679"><img class="imgborder" title="2010_Xmas_Trade_Ornament.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/679/thumbs/2010_Xmas_Trade_Ornament.jpg" alt="2010_Xmas_Trade_Ornament.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Box is butternut with a walnut roof. Roughly 3&quot; tall x 1 1/2 wide. I was just about to give up on this project all together. I had 5 blow up on me before I got this one completed. Still not sure what was going on, but I changed my procedure completely in order to get the job done. I'll start a &quot;procedure&quot; thread on the board. Finish is Velvit oil.<br /><br />5 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9517&title=2010-christmas-c-amp-t&cat=679 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9517&title=2010-christmas-c-amp-t&cat=679 Sun, 21 Nov 2010 05:10:21 +0000 Cherry Urn <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9228&amp;title=cherry-urn&amp;cat=500"><img class="imgborder" title="Cherry_Urn_910.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/500/thumbs/Cherry_Urn_910.jpg" alt="Cherry_Urn_910.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: At 2:30 I began cutting this log. Cut 2 chunks and hauled them home. Cut these into two and then cut the pith out of all four. Sealed 7 and split the 8th in 2 so that I could do this project twice. Sealed one and took the other to the lathe. Piece is 7&quot; tall and 4&quot; diameter. Wild cherry tree came down in a storm shortly after the ice store in 2009. Still pretty wet. Sanded to 320 and finished with multiple coats of Velvet Oil. This is a memorial urn only since the family has already spread the ashes. Would love to hear your comments and questions.<br /><br />7 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9228&title=cherry-urn&cat=500 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9228&title=cherry-urn&cat=500 Sat, 04 Sep 2010 08:25:55 +0000 Call (Deer Grunt) for Summer C&amp;T <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9121&amp;title=call-deer-grunt-for-summer-c-amp-t&amp;cat=535"><img class="imgborder" title="Call_C_T_2010.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/535/thumbs/Call_C_T_2010.JPG" alt="Call_C_T_2010.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: This is a deer grunt, imitating the grunting sound that bucks make. I've used these grunts in the field and have indeed brought bucks into gun range with them. Sold several. In fact, Travis and I made a bunch and sold them at our local street festival. This one is black locust. Comments and critiques are expected and looked forward to.<br /><br />3 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9121&title=call-deer-grunt-for-summer-c-amp-t&cat=535 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=9121&title=call-deer-grunt-for-summer-c-amp-t&cat=535 Mon, 09 Aug 2010 04:32:46 +0000 Spring 2010 C&amp;T (B) <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8911&amp;title=spring-2010-c-amp-t-b&amp;cat=662"><img class="imgborder" title="Walnut_Goblet_510.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/662/thumbs/Walnut_Goblet_510.jpg" alt="Walnut_Goblet_510.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: For your viewing pleasure: One Walnut goblet which measures an exact 2&quot; tall. The stem tapers down to a seductive 1/16&quot; thick at the narrowest point. Sanded and finished with Velvet Oil to give a really nice feel. I told my wife it was a Baptist wine goblet. She said that it would hold too much for Baptists. She's right of course. Questions, comments, and critiques are always welcome. I look forward to seeing what you have to say about it.<br /><br />9 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8911&title=spring-2010-c-amp-t-b&cat=662 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8911&title=spring-2010-c-amp-t-b&cat=662 Tue, 01 Jun 2010 04:39:33 +0000 Spring 2010 C&amp;T (A) <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8910&amp;title=spring-2010-c-amp-t-a&amp;cat=662"><img class="imgborder" title="Small_Walnut_Bowl_510.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/662/thumbs/Small_Walnut_Bowl_510.JPG" alt="Small_Walnut_Bowl_510.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: For your viewing pleasure One Black Walnut box which measures 2&quot; wide by 1 3/4&quot; tall. This piece of wood came from a local tree which came down during one of the many storms that blew through our county over the past few years. Once turned it was hand sanded until a baby smooth surface was achieved. Three coats of Velvet Oil was applied, allowed to dry for 15-20 minutes and hand rubbed. This is one I can see being used to present a special ring to that once in a life time gal. As always, comments, critiques, and questions are welcomed. I look forward to hearing what you have to share about it.<br /><br />7 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8910&title=spring-2010-c-amp-t-a&cat=662 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8910&title=spring-2010-c-amp-t-a&cat=662 Tue, 01 Jun 2010 04:32:33 +0000 $1000 Pen <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8775&amp;title=1000-pen&amp;cat=583"><img class="imgborder" title="Money_Pen.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/583/thumbs/Money_Pen.jpg" alt="Money_Pen.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Turned with one of the shredded money blanks available at so many of the suppliers. No way to know how much money is there, so my $1000 guess is as valid and anyone's. Kit is an Ultimate Cigar in chrome and gold that I purchased from Woodcraft. Sanded through all the micro-mesh grits and then a couple coats of Mylands friction finish added. Wish I had used a CA finish to give it that smooth, slick feel. However, the slightly rough feel that I have now gives the pen a more secure feel in the hand. Any/all comments are welcome<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8775&title=1000-pen&cat=583 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8775&title=1000-pen&cat=583 Sat, 24 Apr 2010 04:16:52 +0000 Ambrosia Maple <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8502&amp;title=ambrosia-maple&amp;cat=575"><img class="imgborder" title="Ambrosia_Maple_1208.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Ambrosia_Maple_1208.jpg" alt="Ambrosia_Maple_1208.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: This one I barely got in the house and SWMBO laid claim to it. Good thing she has such good taste. Not the greatest picture but it gets the point across. Bowl is 2 7/8 tall x 9 wide. Sanded to 400. Has 2 coats of sanding sealer, Seal-A-Cell. Wet sanded. Several coats of Arm-R-Seal wet sanded between each coat. An ogee curve inside and out. Love to hear your thoughts, good or bad. I already know the pic is cruddy. Need to see about taking a better one so that you can really see it.<br /><br />7 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8502&title=ambrosia-maple&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8502&title=ambrosia-maple&cat=575 Tue, 02 Feb 2010 05:41:58 +0000 Just a few pieces I've been working on. <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8394&amp;title=just-a-few-pieces-i-ve-been-working-on&amp;cat=575"><img class="imgborder" title="DSC01607.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/DSC01607.JPG" alt="DSC01607.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Starting in the upper left and moving clockwise, cherry, ash, cottonwood (the core of another piece I've done), olive ash, and cherry again. There are several others that I'll share with you later. Even these I'll show one at a time and give more details.<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8394&title=just-a-few-pieces-i-ve-been-working-on&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8394&title=just-a-few-pieces-i-ve-been-working-on&cat=575 Mon, 28 Dec 2009 17:09:26 +0000 Ornament C&amp;T 2009 <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8373&amp;title=ornament-c-amp-t-2009&amp;cat=579"><img class="imgborder" title="C_T_Winter_2009.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/579/thumbs/C_T_Winter_2009.JPG" alt="C_T_Winter_2009.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Top is apple Body is olive Drop is mahogany Finished with 3 coats of Velvet Oil hand rubbed onto the entire ornament.<br /><br />7 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8373&title=ornament-c-amp-t-2009&cat=579 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8373&title=ornament-c-amp-t-2009&cat=579 Mon, 21 Dec 2009 07:26:56 +0000 Ponderosa Pine <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8206&amp;title=ponderosa-pine&amp;cat=575"><img class="imgborder" title="Ponderosa_Pine_600_x_462_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Ponderosa_Pine_600_x_462_.jpg" alt="Ponderosa_Pine_600_x_462_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />5 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8206&title=ponderosa-pine&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8206&title=ponderosa-pine&cat=575 Mon, 26 Oct 2009 04:46:07 +0000 Masaur Box Open <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8205&amp;title=masaur-box-open&amp;cat=577"><img class="imgborder" title="Masaur_Birch_Box_Open_600_x_469_1.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/577/thumbs/Masaur_Birch_Box_Open_600_x_469_1.jpg" alt="Masaur_Birch_Box_Open_600_x_469_1.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8205&title=masaur-box-open&cat=577 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=8205&title=masaur-box-open&cat=577 Mon, 26 Oct 2009 04:36:44 +0000 Another view of Ambrosia Bowl <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7867&amp;title=another-view-of-ambrosia-bowl&amp;cat=575"><img class="imgborder" title="Ambrosia_Maple_side_600_x_450_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Ambrosia_Maple_side_600_x_450_.jpg" alt="Ambrosia_Maple_side_600_x_450_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Sorry the edges look fuzzy. So hard to shoot a deep, glossy finish. At least it gives you an idea of the ogee curve I used for the outside curve. Very pleasing to the eye and the hand.<br /><br />2 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7867&title=another-view-of-ambrosia-bowl&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7867&title=another-view-of-ambrosia-bowl&cat=575 Thu, 23 Jul 2009 04:37:27 +0000 Ambrosiad Maple Bowl <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7866&amp;title=ambrosiad-maple-bowl&amp;cat=575"><img class="imgborder" title="Ambrosia_Maple_Bowl_800_x_412_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Ambrosia_Maple_Bowl_800_x_412_.jpg" alt="Ambrosia_Maple_Bowl_800_x_412_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Got this piece of wood @ Choice Woods on discount because it didn't have much ambrosia to it. Came out pretty nice. LOML is going to be pretty particular how this one leaves the house. Thought she was going to come unglued when she thought I was donating it to the auction last week. Anyway, this is one of the prettiest bowls I've done, IMHO. It is 8 7/8&quot; wide by 2 3/4 tall. I think it is a bit deceiving, looks to be taller than that. Anyway, the finish is 4 coats of Seal-A-Cell that were sanded between coats with 400 wet, about 8 coats of Arm-R-Seal, which were also wet sanded with 400 between coats. Not buffing this one because I do not want to pull the finish off like I did with another piece or two. Pretty deep and clear as is. I'll buff up with some Ren. Wax before it goes out the door for sure. All comments and questions welcomed<br /><br />5 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7866&title=ambrosiad-maple-bowl&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7866&title=ambrosiad-maple-bowl&cat=575 Thu, 23 Jul 2009 04:03:13 +0000 Rectangular Plate <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7848&amp;title=rectangular-plate&amp;cat=574"><img class="imgborder" title="Maple_Plater_608_800_x_532_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/574/thumbs/Maple_Plater_608_800_x_532_.jpg" alt="Maple_Plater_608_800_x_532_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: This piece is a rectangular plate, 8&quot;x9 1/4&quot; x 1 3/4&quot; tall. The wood is maple that I picked up from the church's by-pass property when we took down some trees. The inspiration for this plate is most assuredly oriental, in fact I had a sushi plate in mind. Lots of stuff going on in this piece, worm holes, ambrosia, fiddleback, etc. All works together to give a lot of interest. Finish is several coats of Seal-A-Cell, hand buffed between with 0000 steal wool, finished off with Beall System, and then Ren. Wax. I just sent it off to a benefit auction for a young lady who has recently lost both legs to a rare disease. I hope it brings a great price for her and the family.<br /><br />5 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7848&title=rectangular-plate&cat=574 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7848&title=rectangular-plate&cat=574 Wed, 15 Jul 2009 21:33:01 +0000 Ash Shallow Bowl <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7843&amp;title=ash-shallow-bowl&amp;cat=575"><img class="imgborder" title="Ash_Plate_800_x_469_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Ash_Plate_800_x_469_.jpg" alt="Ash_Plate_800_x_469_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Nice little piece of Ash I picked up after the ice storm that hit here the end of January. Bowl is 8&quot; wide x 1 3/4&quot; tall. Finish is General Finish, 2 coats of Seal-A-Cell and then about 6 coats of Arm-R-Seal. I wet sanded with 400 between each coat. Used water as lubricant. Haven't decided about the buffing at this point. Might try WD and then carnuba before I use the Renaissance Wax. Slight warp on the rim. LOML says &quot;too bad.&quot; I kind of like it with this little bit of imperfection. More organic I think. Questions and comments always welcome.<br /><br />3 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7843&title=ash-shallow-bowl&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7843&title=ash-shallow-bowl&cat=575 Mon, 13 Jul 2009 04:46:34 +0000 Olive Ash Platter <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7839&amp;title=olive-ash-platter&amp;cat=574"><img class="imgborder" title="Olive_Ash_Platter_800_x_600_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/574/thumbs/Olive_Ash_Platter_800_x_600_.jpg" alt="Olive_Ash_Platter_800_x_600_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: I got this piece of wood from Clay at Choice Woods. He was having a sale on some wood that wasn't first rate before he moved to his new location. Wonderful wood, just didn't have the grain that some does. It is now the property of our nephew and his new wife. LOML gave it to them as a wedding present. Anyway, it is right at 12&quot; wide and about 1 3/4&quot; tall. Sanded to 400 dry and then wet sanded between coats of Seal-A-Cell and Arm-R-Seal. One of the few pieces that I had no problems with. It went smoothly from start to finish. Questions and comments are always welcome.<br /><br />5 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7839&title=olive-ash-platter&cat=574 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7839&title=olive-ash-platter&cat=574 Sat, 11 Jul 2009 03:02:03 +0000 Osage Orange Bowl <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7830&amp;title=osage-orange-bowl&amp;cat=575"><img class="imgborder" title="Osage_Orange.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Osage_Orange.JPG" alt="Osage_Orange.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: 6 1/2&quot; wide x 3&quot; tall. Finish is 2 coats of Seal-a-Cell followed by 5 coats of Arm-r-Seal. Sanded between coats with 400 dipped in water. Seems to worked pretty well. Not flawless, but came out pretty nice for this piece. I don't care much for the shape myself. The intent was something a bit different, but it ended up like this. So it is what it is. Might sell it for something less than the normal. We'll see. Comments and questions always accepted.<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7830&title=osage-orange-bowl&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7830&title=osage-orange-bowl&cat=575 Mon, 06 Jul 2009 04:19:42 +0000 Old Yellow Heart Pine Goblet <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7821&amp;title=old-yellow-heart-pine-goblet&amp;cat=581"><img class="imgborder" title="Highland_goblet.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/581/thumbs/Highland_goblet.jpg" alt="Highland_goblet.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: This is the companion goblet that I made for myself to go with the heart pine plate that I posted a few days ago. Cup and base are both heart pine. I used a piece of Mt. Mahogany for the stem. I was conserving my pine for some reason. Anyway, the goblet is 3 1/8&quot; wide x 9&quot; tall. Cup is about 1/16&quot; thick top to bottom. There is light that passes through in a couple of places. Finish is DO, buffed down between coats with 0000 steel wool. Must have 10-12 coats on it. Buffed with tripoli, WD, and carnuba. Finally buffed by hand with Ren wax. The base is a tad small, but this is staying in my collection so it really matters not to me. I love it and know where it came from. Would still like to hear your comments and your questions.<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7821&title=old-yellow-heart-pine-goblet&cat=581 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7821&title=old-yellow-heart-pine-goblet&cat=581 Tue, 30 Jun 2009 03:51:46 +0000 Masur Box Open <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7798&amp;title=masur-box-open&amp;cat=577"><img class="imgborder" title="Masaur_Birch_Box_Open_600_x_469_.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/577/thumbs/Masaur_Birch_Box_Open_600_x_469_.jpg" alt="Masaur_Birch_Box_Open_600_x_469_.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Here it is open. As you can see the tenon is not birch but walnut. Really made a nice contrast. When the birch tenon broke off, I first turned a small rabbit in the neck of the box. Then I quickly grabbed this piece of walnut that was close by and turned it to be the right size to insert into the top of the box. Once in place, I turned the inside to the size I wanted and smoothed the inside of the box neck. Fitted the lid to this new tenon and you see the results. Makes for a really nice surprise when you open this little box. As always, comments and questions welcome.<br /><br />10 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7798&title=masur-box-open&cat=577 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7798&title=masur-box-open&cat=577 Thu, 25 Jun 2009 02:31:58 +0000 Masur Birch Box <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7797&amp;title=masur-birch-box&amp;cat=577"><img class="imgborder" title="Masaur_Birch_Box.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/577/thumbs/Masaur_Birch_Box.JPG" alt="Masaur_Birch_Box.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: If I didn't spell the name of this wood correctly, someone please correct me. I bought this piece of wood at the AAW Symposium in Louisville. Just recently decided that it had sat on the shelf more than long enough. Box is 3 1/2&quot; wide x 4 3/4&quot; tall. The design is supposed to be ginger jar inspired. Finish is Seal-A-Cell followed by several coats of Arm-R-Seal. Sanded between coats with 400 w/d using water as a lubricant. Turned and sanded very nicely. My only issue with the whole turning was that I got the bottom edge of the tenon too thin and it broke off. I'll post another pic with the lid off so that you can see the fix. Comments and questions always welcome.<br /><br />2 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7797&title=masur-birch-box&cat=577 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7797&title=masur-birch-box&cat=577 Thu, 25 Jun 2009 02:22:35 +0000 Yellow Heart Pine Bowl <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7776&amp;title=yellow-heart-pine-bowl&amp;cat=575"><img class="imgborder" title="Hiland_bowl.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Hiland_bowl.jpg" alt="Hiland_bowl.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: I thought I posted these before but I don't see it in my gallery. Anyway, this one is about 6&quot; diameter x 2&quot; tall. Finish is loads of DO and then buffed. The wood came from a post that was taken out of a church in Louisville. It had been there for about 120 years. They stopped counting the growth rings at 150. There were more in the post and surly even more in the tree. So the tree began life at least 300 years ago. I got a couple of pieces of it to make a bowl and goblet for the church. I used what was left over to make a set for myself. I'll post the goblet the next post. Any questions and/or comments welcome.<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7776&title=yellow-heart-pine-bowl&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7776&title=yellow-heart-pine-bowl&cat=575 Thu, 18 Jun 2009 04:07:34 +0000 Ponderosa Pine <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7760&amp;title=ponderosa-pine&amp;cat=575"><img class="imgborder" title="Ponderosa_Pine.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Ponderosa_Pine.JPG" alt="Ponderosa_Pine.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Roughly 6 1/2&quot; wide x 3 1/2&quot; tall. 1/8&quot; or less thick from top to bottom. In fact, the center of the bottom will let light through without any problem. This is one of those turnings that if I still had a bunch of DO, I would have done the multiple soak and dry cycle thing ala Ron Kent. Finish is several coats of Seal-A-Cell followed by several coats of Arm-R-Seal. This is another case to show us all that too much under the top coat is detrimental to the finial finish. The buffing wheels pulled the top coat right off. I had to sand it back and start again. No more than one coat of the sealer for me from now on. Questions and comments always welcome.<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7760&title=ponderosa-pine&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7760&title=ponderosa-pine&cat=575 Sun, 14 Jun 2009 03:38:37 +0000 Spalted Pecan Bowl <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7739&amp;title=spalted-pecan-bowl&amp;cat=575"><img class="imgborder" title="Spalted_Pecan_Bowl.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Spalted_Pecan_Bowl.JPG" alt="Spalted_Pecan_Bowl.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: I bought this piece of wood from Dale the Burl Guy several years ago. At that time I only had the ShopSmith and it was just too light to do any good with this chunk of wood. Way off balance and even after I got it round. I even took it over to Phil's to get it round. Once round I still had an out of balance blank. It has been sitting on my to-do shelf for a long time, until a few months ago when I pulled it down and turned it on my Nova 1624. This bowl is 9&quot; x 3 3/4&quot;. There are 4 coats of Seal-A-Cell and 5 or 6 coats of Arm-A-Seal. Each coat was wet sanded with 400 grit wet/dry. It is still not perfectly smooth because of the various inclusions and deep open grain areas. It was really a joy to turn once I had it on the Nova and applied sharp tools to it. All comments and questions welcome.<br /><br />6 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7739&title=spalted-pecan-bowl&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7739&title=spalted-pecan-bowl&cat=575 Sat, 06 Jun 2009 03:15:45 +0000 Two Bowls from One Blank <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7737&amp;title=two-bowls-from-one-blank&amp;cat=575"><img class="imgborder" title="Cottonwood_2from1.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Cottonwood_2from1.JPG" alt="Cottonwood_2from1.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: This is a pair of cotton wood bowls. The smaller bowl was cored out of the larger one using Richard Steuss' Bowl Saw. Proceedure is to turn the outside of the blank, reverse, cut a deep groove into the inside of the bowl, insert the saw into the groove and rotate the saw blade into center. Pretty quick the core pops out and you have 2 blanks. Smaller is roughly 3&quot; x 3/4&quot;. I sanded through the bottom and inserted a piece of olive. Came out pretty nice. The larger is about 5.5&quot; x 3&quot;. Both are finished with 2 coats of Seal-A-Cell and several coats of Arm-A-Seal. As usual, the cotton wood had nothing going for it before the finish was on it. After the finish, well, you be the judge.<br /><br />5 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7737&title=two-bowls-from-one-blank&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7737&title=two-bowls-from-one-blank&cat=575 Fri, 05 Jun 2009 03:39:58 +0000 Cherry Box w/Chinaberry Inlay <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7729&amp;title=cherry-box-w-chinaberry-inlay&amp;cat=577"><img class="imgborder" title="Cherry_Challenge_Box.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/577/thumbs/Cherry_Challenge_Box.JPG" alt="Cherry_Challenge_Box.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: This was a pretty cool project. You may remember I turned a similar piece under Jimmy Clewes instruction. This one ended up needing to be plugged on the inside of the lid so I made an olive inlay that would not only fill the top, but fill the opening on the inside as well. Not sure what I did, but the olive inlay on top got too thin as well. So, the Chinaberry went into the top. Always a learning opportunity. Mike, it's all yours now big boy. Hope it fits in your gallery ok. Finish is a couple of coats of Seal-A-Cell followed by 4 coats of Arm-A-Cell, wet sanded with 400 grit between each coat.<br /><br />9 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7729&title=cherry-box-w-chinaberry-inlay&cat=577 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7729&title=cherry-box-w-chinaberry-inlay&cat=577 Tue, 02 Jun 2009 04:02:35 +0000 Cherry Pot <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7545&amp;title=cherry-pot&amp;cat=575"><img class="imgborder" title="Given_to_B.jpg" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/575/thumbs/Given_to_B.jpg" alt="Given_to_B.jpg" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: This is a small cherry piece that I gave to my secretary for Christmas a couple of years ago. As I remember it was about 3&quot; tall x 4&quot; wide. Sorry about the lousy pic, but it really was a nice little piece. Mostly wanted to test the new settings to see if the thumbnails would settle in proper orientation. Maybe you'll be able to see enough for a bit of inspiration. Hope you like it.<br /><br />1 comment http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7545&title=cherry-pot&cat=575 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7545&title=cherry-pot&cat=575 Wed, 22 Apr 2009 05:27:26 +0000 Clews Box Lid <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7236&amp;title=clews-box-lid&amp;cat=577"><img class="imgborder" title="Clewes_Box_Lid.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/577/thumbs/Clewes_Box_Lid.JPG" alt="Clewes_Box_Lid.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Here is a close up of the lid. That is a piece of red palm that has been inlayed into the lid. I had never turned red palm before. Jimmy has selected it because it was pretty hard from the beginning. Not much extra work was needed to get it ready for the inlay work other than turning, sanding, finishing, and parting it off. The lid was then recessed to receive the resulting disk. Had I been home doing this I would have used a bit of compressed air to clean the pores a bit, but for a class it was not too bad. Might put another coat of finish on the whole box. I'm thinking that it would really help the lid particularly. Questions?<br /><br />4 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7236&title=clews-box-lid&cat=577 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7236&title=clews-box-lid&cat=577 Sun, 22 Feb 2009 05:52:43 +0000 Clewes box open <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7235&amp;title=clewes-box-open&amp;cat=577"><img class="imgborder" title="Clewes_Box_Open.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/577/thumbs/Clewes_Box_Open.JPG" alt="Clewes_Box_Open.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Here is a shot of the box open. Kind of a customary shot when showing boxes I guess. Anyway, it give you a bit more of an idea of what is going on. Questions? http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7235&title=clewes-box-open&cat=577 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7235&title=clewes-box-open&cat=577 Sun, 22 Feb 2009 05:46:04 +0000 Cherry Clewes Box <a href="http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7234&amp;title=cherry-clewes-box&amp;cat=577"><img class="imgborder" title="Cherry_Clewes_Box.JPG" border="0" src="http://www.woodturnersresource.com/wrphotopost/data/577/thumbs/Cherry_Clewes_Box.JPG" alt="Cherry_Clewes_Box.JPG" /></a><br /><br />by: Rev. Doug Miller<br /><br />Description}: Here's the proof Cherry box approx 4&quot; tall x 3&quot; wide Finish is Mylands Friction Polish for now Jimmy Clewes himself was very complimentary of this one. He made a pass or two with a &quot;roughing out&quot; gouge to mate the lid and body. So I can call this a Clewes box, right?<br /><br />11 comments http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7234&title=cherry-clewes-box&cat=577 http://www.woodturnersresource.com/wrphotopost/showphoto.php?photo=7234&title=cherry-clewes-box&cat=577 Sun, 22 Feb 2009 05:43:30 +0000