Now you know what I needed the 17/32" drill bit for. Turns out it was still usta hair too small but, some 180 grit gouge around a dowel rod helped for just the mircon if an inch that was needed. IT didn't turn out just like IPlanned but then what ever does.
What happened was I was given one of those screwdrivers that you can pull the haft out of the handle and each end has a removable tip with a cross tip and a flat blade on each end but of different sizes. Well, I broke the plastic handle doing something that I should not have been doing. I had seen ina mag somewhere that one of the supply companieswas selling screwdriver kits and it looked pretty much like what I had after I broke mine so I thought I would try and do a wood handle and here is what I got.