The Woodturning Forum - Woodturner's Resource - C&T

JimQuarles

WR Addict
WR Patron

Offline

WR Rocks, BIG Time!

Posts: 13,194

Glendale, AZ
Arizona
USA
Gender: male

C&T - Cube
Jun 19^th, 2014 at 12:32pm

MAY I HAVE YOUR ATTENTION PLEASE!

I have had several requests, so it is time for us to have a C&T.

Here is how it works:
   Post in this thread if you want to participate, or you can wait until after you have completed your piece.
   Turn your piece and post again that you have completed it.
   Take a picture of it, but don’t post in the gallery until the designated time.
   Get it boxed so it is ready to mail.
   Names will be put into random.com to assign with whom you will trade your piece.
   This is a partner trade, so after the deadline I will post the pairings in this thread.
   PM your mailing address to your trade partner.
   Get your package into the mail by the mailing deadline and then sit back and wait for one to arrive at your house.

This one is a bit of a challenge. We’ll go back and revisit another oldie/goldie, the Cube Challenge. Here's the deal. You start with a cube. It doesn't have to be one piece of wood, it can be a glue up. For this challenge we'll say no larger than 5" x 5" x 5". Once the cube is established your task is to turn a piece to trade that will be a challenge to you but will also leave some part of the cube so that it will be known that you used a cube to start with. Feel free to look back in the Multimedia File Viewing and Clickable Links are available for Registered Members only!!  You need to

or

of the pieces that were turned for the last cube challenge. If you participated, do not do the same thing you did last time. Even though we will all start with a 3" to 5" cube, your final size will vary depending on how large your cube is and your design. However, try to keep as much of the size as possible. I expect to see edges, corners, points, etc. as evidence of the original cube being used.

A couple of Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

or

also fit the specs.

This C&T is open to all members, even new ones.

Schedule: You can begin to sign up on this thread anytime and continue to sign up until the dead-line.
C&T Gallery will open:                               Wednesday, 7/16/14
Deadline to have photos in the Gallery:          Sunday, 7/20/14, 9am PDT
Partners to be announced:                         Sunday, 7/20/14
Piece in the mail no later than:                   Saturday, 7/26/14

So, get your name on the list and get to turning. Enjoy the challenge and do your best, someone will be adding it to their Rogue's Gallery. You should learn something, or do something, new in the process. That is the challenge. I look forward not only to see who is joining me in this challenge, but what everyone comes up with. There are always some that will surprise us with their imagination and interpretation of the "rules." Have fun and let the games begin.

For those of you who are new to our C&T's, it is a Challenge to create a piece, to the best of your abilities, that meets the specifications given, & once completed, you will Trade it to another participant either in a Round Robin, where A sends to B, B sends to C, C sends to D... or you have a Partner to send your piece, and your partner will send you their piece. Trade assignments are given after pieces are completed and all photos posted. If you haven’t posted a picture of your completed piece by the deadline, you will not be eligible for a trade.

The timing allows about 4 weeks to give people time to learn and practice if need be.    You can post in this thread as soon as your piece is done, but don't post any pictures until the challenge gallery opens. Remember, No Photo, No Trade. Pictures need to be clear and less than 75KB to post in the gallery. If you haven’t already registered in the gallery, do so using the same User Name as in the forum. It uses different software, so it is necessary to register and sign in separately.

This trade will be a Partner trade. I will use Random.org to select the trades on Sunday, July 20. I will then post the pairings in this thread, and you need to PM your address to your partner. Packages should be postmarked by Saturday, July 26.

OK! Now who is going to sign up to try this? Are you in? It doesn’t matter if you are a seasoned turner or a relative newbie. All we ask is that you make a serious effort to do your best. If you are in, indicate whether you are willing to spend the little extra to ship outside the country if any of our Canadian or International members participate.

Everybody! Lets Turn and Trade!!

Back to top

Mentor Basics, Pens, small stuff, Acrylics, EasyRougher.
Just Turnin' Around! Glendale, AZ Cool

"Right now I'm having amnesia and deja vu at the same time.
I think I've forgotten this before." - Steven Wright

IP Logged

Guy Bratt WR Addict Offline WR Rocks! Posts: 940 Richmond Michigan USA Gender:	Re: C&T - Cube Reply #1 - Jun 19^th, 2014 at 12:55pm OK I'll take a crack at this. I saw something similar recently. This is just the boost to give it a try.
Back to top	Old, Fat,n Ugly...I shed 100 pounds this year. Still old. Still ugly. But what can you do at this age? You know? If you knew me you'd see my avatar and I really look a lot alike. IP Logged

Jennifer Hasan Active Member Offline WR Rocks! Posts: 232 Beacon, ny New York USA	Re: C&T - Cube Reply #2 - Jun 19^th, 2014 at 4:09pm Count me in! Jenn
Back to top	IP Logged

Bert Delisle WR Addict Offline Posts: 1,424 Calgary Alberta Canada Gender:	Re: C&T - Cube Reply #3 - Jun 19^th, 2014 at 4:43pm I will take a crack at it. Sounds like fun.
Back to top	IP Logged

Tony Rozendaal WR Addict Offline WR Rocks! Posts: 1,003 East Troy, WI Wisconsin USA Gender:	Re: C&T - Cube Reply #4 - Jun 19^th, 2014 at 7:51pm I'll try - put me down. I can do the international thing if need be.
Back to top	« Last Edit: Jun 19^th, 2014 at 7:53pm by Tony Rozendaal » Turnin' and learnin' Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or IP Logged

Curtis Warstler Senior Member Offline WR Rocks! Posts: 354 Thornton Colorado USA Gender:	Re: C&T - Cube Reply #5 - Jun 20^th, 2014 at 2:02am Ill give it a shot. Now to find a cube....
Back to top	So many hobbies so little time..... IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #6 - Jun 22^nd, 2014 at 9:26pm I got my cube ready. Now to figure what to do with it. It is a 3" cube of Big Leaf Maple Burl.
Back to top	Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or Cubecr1.jpg (Attachment deleted) Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Bert Delisle WR Addict Offline Posts: 1,424 Calgary Alberta Canada Gender:	Re: C&T - Cube Reply #7 - Jun 23^rd, 2014 at 1:22pm I am going to try something I have never done before Whom ever gets this one is one will be in possession of a Bert original Certified 2014 #1, complete with any design opportunities that come along the way. The wood is rock maple from a bat blank 3x3x3.
Back to top	« Last Edit: Jun 23^rd, 2014 at 1:24pm by Bert Delisle » Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or image_156.jpg (Attachment deleted) IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #8 - Jun 23^rd, 2014 at 1:39pm That is the whole purpose of the C&T's. Challenging your mental limitations, imagination, and abilities.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Tony Rozendaal WR Addict Offline WR Rocks! Posts: 1,003 East Troy, WI Wisconsin USA Gender:	Re: C&T - Cube Reply #9 - Jun 23^rd, 2014 at 7:40pm I have a test cube from maple, a cube from mulberry and an emergency back-up cube (or two) from cherry. Now if I only knew what to do with them. And could find the time to do it.
Back to top	« Last Edit: Jun 23^rd, 2014 at 7:40pm by Tony Rozendaal » Turnin' and learnin' Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or IP Logged

Curtis Warstler Senior Member Offline WR Rocks! Posts: 354 Thornton Colorado USA Gender:	Re: C&T - Cube Reply #10 - Jun 23^rd, 2014 at 10:35pm I know what I want to try but I have to find a cube! Need a 5x5x5 cube...
Back to top	So many hobbies so little time..... IP Logged

Ed Weber WR Administrator WR Patron Offline Posts: 8,989 Wilton California USA Gender:	Re: C&T - Cube Reply #11 - Jun 24^th, 2014 at 11:56am Curtis Warstler wrote on Jun 23^rd, 2014 at 10:35pm: Need a 5x5x5 cube... 5" cube is the maximum size, it can be smaller. Come on everyone let's get some more people in this. There are over 6700 members, lets try to get more than a half dozen to join in.
Back to top	IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #12 - Jun 24^th, 2014 at 12:05pm As Ed says, 5" is the maximum. The minimum is 3". Ed, where is your cube?
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Ed Weber WR Administrator WR Patron Offline Posts: 8,989 Wilton California USA Gender:	Re: C&T - Cube Reply #13 - Jun 24^th, 2014 at 12:35pm Keep your shirt on, it's coming.
Back to top	IP Logged

Curtis Warstler Senior Member Offline WR Rocks! Posts: 354 Thornton Colorado USA Gender:	Re: C&T - Cube Reply #14 - Jun 24^th, 2014 at 8:28pm My biggest issue right now is I have no way till next week to cut any of my stock down no band saw. I have a cube but I dont want to use it as it is a piece of eucaliptis buryl, and is tagged for a hollow form. So Back to the shelf to try to find a candidate.... i do have a piece od orange osage.....
Back to top	So many hobbies so little time..... IP Logged

Bob Hamilton WR Addict Offline Posts: 1,118 Forest, Ontario, Canada Ontario Canada Gender:	Re: C&T - Cube Reply #15 - Jun 24^th, 2014 at 10:33pm Count me in, Jim, and I am okay with international shipping. Ya know, achieving a perfect cube is pretty challenging in and of itself without actually making something out of it... Bob
Back to top	IP Logged

Philip Peak WR Addict Offline Posts: 3,431 Southeastern Indiana Indiana USA Gender:	Re: C&T - Cube Reply #16 - Jun 30^th, 2014 at 2:06pm Jim If it is not too late I think I will give this a try. Even have an idea already if I can make it work.
Back to top	The woodturner formerly known as PhilipE. Willing to mentor members who live in the southeastern Indiana/Kentuckiana area (Louisville area) IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #17 - Jun 30^th, 2014 at 2:17pm Plenty of time. We still have 3 weeks until the deadline. The more the merrier! Anyone else?
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Dennis McManaman Full Member Offline WR Rocks! Posts: 86 Amarillo Texas USA Gender:	Re: C&T - Cube Reply #18 - Jun 30^th, 2014 at 2:46pm I know I am mentally deficient at the best of times But are we supposed to start with a cube And turn some thing? I just want to be clear. My 1 working brain cell apparently is on strike today I think I want in on this.
Back to top	Master sawdust and splinter maker. Life Member NRA Life Member VFW Life Member DAV Life Member American Legion American by birth, Patriot by Choice. IP Logged

JimQuarles

WR Addict
WR Patron

Offline

WR Rocks, BIG Time!

Posts: 13,194

Glendale, AZ
Arizona
USA
Gender: male

Re: C&T - Cube
Reply #19 - Jun 30^th, 2014 at 3:40pm

JimQuarles wrote on Jun 19^th, 2014 at 12:32pm:

Once the cube is established your task is to turn a piece to trade that will be a challenge to you but will also leave some part of the cube so that it will be known that you used a cube to start with.

Dennis, welcome to the challenge. Look at the Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

or

of the last Cube C&T to get some ideas.

Back to top

Mentor Basics, Pens, small stuff, Acrylics, EasyRougher.
Just Turnin' Around! Glendale, AZ Cool

"Right now I'm having amnesia and deja vu at the same time.
I think I've forgotten this before." - Steven Wright

IP Logged

Bob Hamilton WR Addict Offline Posts: 1,118 Forest, Ontario, Canada Ontario Canada Gender:	Re: C&T - Cube Reply #20 - Jun 30^th, 2014 at 4:41pm Dennis, yes, you start with a cube and make something from it, leaving at least some corners or edges that show that it was originally a cube. Bob
Back to top	IP Logged

Bert Delisle

WR Addict

Offline

Posts: 1,424

Calgary
Alberta
Canada
Gender: male

Re: C&T - Cube
Reply #21 - Jun 30^th, 2014 at 11:31pm

Bob Hamilton wrote on Jun 24^th, 2014 at 10:33pm:

Ya know, achieving a perfect cube is pretty challenging in and of itself without actually making something out of it... Cheesy

Bob

I must have got lucky, or it was omen, the cube started out perfect 3.125 x 3.125 x 3.125 after a few minutes on the oscillating belt sander.
what happened after I mounted it on the lathe, well lets just say design opportunities abound, Cheesy

Sometimes the wood just has a way of letting one know what doesn't belong. I definitely learned some new things.

Back to top

IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #22 - Jun 30^th, 2014 at 11:35pm Bert Delisle wrote on Jun 30^th, 2014 at 11:31pm: Sometimes the wood just has a way of letting one know what doesn't belong. I definitely learned some new things. Funny thing about that... Some people wonder why we call it a challenge.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Dennis McManaman Full Member Offline WR Rocks! Posts: 86 Amarillo Texas USA Gender:	Re: C&T - Cube Reply #23 - Jul 1^st, 2014 at 6:33am Thanks a lot Jim. Sure I will be happy to Participate. Minimum of 3" and a maximum of 5"?? Any other specifications I should know of? f they are posted somewhere I failed to see them and again apologize.
Back to top	Master sawdust and splinter maker. Life Member NRA Life Member VFW Life Member DAV Life Member American Legion American by birth, Patriot by Choice. IP Logged

Bob Hamilton

WR Addict

Offline

Posts: 1,118

Forest, Ontario, Canada
Ontario
Canada
Gender: male

Re: C&T - Cube
Reply #24 - Jul 1^st, 2014 at 10:31am

Dennis, in the first post of this thread:

This one is a bit of a challenge. We’ll go back and revisit another oldie/goldie, the Cube Challenge. Here's the deal. You start with a cube. It doesn't have to be one piece of wood, it can be a glue up. For this challenge we'll say no larger than 5" x 5" x 5". Once the cube is established your task is to turn a piece to trade that will be a challenge to you but will also leave some part of the cube so that it will be known that you used a cube to start with. Feel free to look back in the Gallery Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or of the pieces that were turned for the last cube challenge. If you participated, do not do the same thing you did last time. Even though we will all start with a 3" to 5" cube, your final size will vary depending on how large your cube is and your design. However, try to keep as much of the size as possible. I expect to see edges, corners, points, etc. as evidence of the original cube being used.

A couple of these: Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or also fit the specs.

Take care
Bob

Back to top

« Last Edit: Jul 1^st, 2014 at 10:35am by Bob Hamilton »

IP Logged

Dennis McManaman Full Member Offline WR Rocks! Posts: 86 Amarillo Texas USA Gender:	Re: C&T - Cube Reply #25 - Jul 1^st, 2014 at 6:42pm Thanks a lot Bob, very informative and helpful. Quite the challenge to say the least. but it is also stimulating.
Back to top	Master sawdust and splinter maker. Life Member NRA Life Member VFW Life Member DAV Life Member American Legion American by birth, Patriot by Choice. IP Logged

Curtis Warstler

Senior Member

Offline

WR Rocks!

Posts: 354

Thornton
Colorado
USA
Gender: male

Re: C&T - Cube
Reply #26 - Jul 5^th, 2014 at 4:52pm

Okay Here is my cube. Roughly 4 1/8"x 4 1/8"x 4 3/4" ( extra length for foot to chuck ).

Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

or

It is orange osage, I have an image of what I want to do. we shall see if I can make it a reality. It does have a check near one edge which I am confident I can stabilize. we shall see. Ill get started on it next weekend( which for me is in 2 days) Wink

Back to top

So many hobbies so little time.....

IP Logged

Ed Weber

WR Administrator
WR Patron

Offline

Posts: 8,989

Wilton
California
USA
Gender: male

Re: C&T - Cube
Reply #27 - Jul 5^th, 2014 at 7:52pm

JimQuarles wrote on Jun 19^th, 2014 at 12:32pm:

Here's the deal. You start with a cube. It doesn't have to be one piece of wood, it can be a glue up. For this challenge we'll say no larger than 5" x 5" x 5". Once the cube is established your task is to turn a piece to trade that will be a challenge to you but will also leave some part of the cube so that it will be known that you used a cube to start with

Curtis Warstler wrote on Jul 5^th, 2014 at 4:52pm:

Okay Here is my cube. Roughly 4 1/8"x 4 1/8"x 4 3/4" ( extra length for foot to chuck ).

While I'm not the cube police, I think you should start with a proper cube, without the extra for the foot.(that may be the challenge part for you)
If we all start with something other than a true cube, the we lose an element of the challenge.
JMO

Back to top

IP Logged

Curtis Warstler Senior Member Offline WR Rocks! Posts: 354 Thornton Colorado USA Gender:	Re: C&T - Cube Reply #28 - Jul 5^th, 2014 at 10:20pm Thanks for pointing that out ed. I will try to trim it down.
Back to top	So many hobbies so little time..... IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #29 - Jul 6^th, 2014 at 3:09pm 2 weeks left. Who else is trying this? I'm fighting with the finish on BLM burl. Just had to sand it all off.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Philip Peak WR Addict Offline Posts: 3,431 Southeastern Indiana Indiana USA Gender:	Re: C&T - Cube Reply #30 - Jul 6^th, 2014 at 4:42pm I am still trying to come up with a decent cube.
Back to top	The woodturner formerly known as PhilipE. Willing to mentor members who live in the southeastern Indiana/Kentuckiana area (Louisville area) IP Logged

Curtis Warstler Senior Member Offline WR Rocks! Posts: 354 Thornton Colorado USA Gender:	Re: C&T - Cube Reply #31 - Jul 8^th, 2014 at 2:41pm Ok Guys I may be out... Se this thread; Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or I still want to give this a shot but I have to find a different Cube .
Back to top	So many hobbies so little time..... IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #32 - Jul 8^th, 2014 at 3:51pm You got almost 2 weeks left, so keep looking.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Curtis Warstler Senior Member Offline WR Rocks! Posts: 354 Thornton Colorado USA Gender:	Re: C&T - Cube Reply #33 - Jul 8^th, 2014 at 4:17pm I will have to go to Woodcraft or Rockler and find some Blanks. All my stock is too small Under 3". If someone has a blank to send me sooner we can work something out .
Back to top	So many hobbies so little time..... IP Logged

Dennis McManaman Full Member Offline WR Rocks! Posts: 86 Amarillo Texas USA Gender:	Re: C&T - Cube Reply #34 - Jul 10^th, 2014 at 9:15am I have ruined several "test" pieces.... I may end up with a mishap pen bunch of shavings and titebond.....sigh
Back to top	Master sawdust and splinter maker. Life Member NRA Life Member VFW Life Member DAV Life Member American Legion American by birth, Patriot by Choice. IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #35 - Jul 10^th, 2014 at 11:38am I went through 3 cubes before I got one turned. Now to get it finished. 10 Days left!
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Tom Sherman Full Member Offline WR Rocks! Posts: 75 Gender:	Re: C&T - Cube Reply #36 - Jul 10^th, 2014 at 1:34pm I'll take a stab at it,I have about 3 or 4 days I can work on it, but we'll see what comes up.
Back to top	IP Logged

Ed Weber WR Administrator WR Patron Offline Posts: 8,989 Wilton California USA Gender:	Re: C&T - Cube Reply #37 - Jul 10^th, 2014 at 2:04pm JimQuarles wrote on Jul 10^th, 2014 at 11:38am: Now to get it finished don't you mean finished again What happened the first time?
Back to top	IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #38 - Jul 10^th, 2014 at 3:22pm Well I got the new finish started... I've just got to figure out what to put over the BLO.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #39 - Jul 13^th, 2014 at 4:41pm Less than a week left!!!
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Bert Delisle WR Addict Offline Posts: 1,424 Calgary Alberta Canada Gender:	Re: C&T - Cube Reply #40 - Jul 13^th, 2014 at 8:20pm Boxed and ready for shipping, international, no problem.
Back to top	IP Logged

Tony Rozendaal WR Addict Offline WR Rocks! Posts: 1,003 East Troy, WI Wisconsin USA Gender:	Re: C&T - Cube Reply #41 - Jul 14^th, 2014 at 11:19am Just waiting for the finish to dry on mine...
Back to top	Turnin' and learnin' Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or IP Logged

Philip Peak WR Addict Offline Posts: 3,431 Southeastern Indiana Indiana USA Gender:	Re: C&T - Cube Reply #42 - Jul 14^th, 2014 at 4:46pm I am having some problems with mine. I will try my best to get it together and get it done but don't be surprised if I have to bow out at the last minute. What I envisioned is harder to do than I expected.
Back to top	The woodturner formerly known as PhilipE. Willing to mentor members who live in the southeastern Indiana/Kentuckiana area (Louisville area) IP Logged

Curtis Warstler Senior Member Offline WR Rocks! Posts: 354 Thornton Colorado USA Gender:	Re: C&T - Cube Reply #43 - Jul 14^th, 2014 at 5:13pm I am still trying to come up with replacement. Also I only have tomorrow off from work. Will try to push through but ill have to see what happens.
Back to top	So many hobbies so little time..... IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #44 - Jul 15^th, 2014 at 1:45pm Remember, the gallery will open for pictures tomorrow, and all pictures have to posted by Sunday morning before I login. Also be sure to post here that you are in the C&T and specify whether or not you are willing to pay the slightly higher international shipping to Canada. I just need to put the final finish on mine.
Back to top	« Last Edit: Jul 15^th, 2014 at 1:46pm by JimQuarles » Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Curtis Warstler Senior Member Offline WR Rocks! Posts: 354 Thornton Colorado USA Gender:	Re: C&T - Cube Reply #45 - Jul 15^th, 2014 at 5:36pm I got a couple more cubes. I will have to see if I can get some turning done on friday and sat. I am working everyday with a couple doubles. Ill see what happens.
Back to top	So many hobbies so little time..... IP Logged

Guy Bratt WR Addict Offline WR Rocks! Posts: 940 Richmond Michigan USA Gender:	Re: C&T - Cube Reply #46 - Jul 16^th, 2014 at 3:05pm Well I'm going to pull out of the C&T I just can't find enough time to work consistantly. With my invalid wife, Dr.'s visits, needy dogs, cooking, cleaning, laundry and the lawn I can't pull it off this time. Maybe this winter. sorry I'm cranky
Back to top	Old, Fat,n Ugly...I shed 100 pounds this year. Still old. Still ugly. But what can you do at this age? You know? If you knew me you'd see my avatar and I really look a lot alike. IP Logged

Ed Weber WR Administrator WR Patron Offline Posts: 8,989 Wilton California USA Gender:	Re: C&T - Cube Reply #47 - Jul 16^th, 2014 at 7:14pm I'll try to post a pic in the gallery tomorrow. For now, here is what I started with Jim, is there a list of who is participating? I'll send to Canada if I have to
Back to top	Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or Cube-1_cropped__577_x_600_.jpg (Attachment deleted) IP Logged

JimQuarles

WR Addict
WR Patron

Offline

WR Rocks, BIG Time!

Posts: 13,194

Glendale, AZ
Arizona
USA
Gender: male

Re: C&T - Cube
Reply #48 - Jul 16^th, 2014 at 10:00pm

I don't have a list yet, as not everyone has said whether they have finished.

The Gallery is open. Be sure to post under "2014 Cube C&T." If you haven't already signed up in the gallery, you will need to do it separately from the forum since it uses different software. Be sure to sign up using the SAME NAME! That way we know who you are.

This is what I started with and how I started. Obviously, it still needs another coat of WOP and polishing. Roll Eyes

Back to top

« Last Edit: Jul 16^th, 2014 at 10:00pm by JimQuarles »

Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

or

CubeCR1.jpg (Attachment deleted)

Mentor Basics, Pens, small stuff, Acrylics, EasyRougher.
Just Turnin' Around! Glendale, AZ Cool

"Right now I'm having amnesia and deja vu at the same time.
I think I've forgotten this before." - Steven Wright

IP Logged

Curtis Warstler Senior Member Offline WR Rocks! Posts: 354 Thornton Colorado USA Gender:	Re: C&T - Cube Reply #49 - Jul 16^th, 2014 at 10:41pm I have 3 days. Jim I am going to try to turn friday and saturday does the final photo have to have finish as it may be tuesday before finish is done.
Back to top	So many hobbies so little time..... IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #50 - Jul 17^th, 2014 at 12:49am Pictures have to be posted by Sunday morning to be eligible. I will close the C&T when I log in Sunday. Pieces have to be in the mail no later than Saturday, July 26.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Ed Weber WR Administrator WR Patron Offline Posts: 8,989 Wilton California USA Gender:	Re: C&T - Cube Reply #51 - Jul 17^th, 2014 at 11:05am This is the chuck setup that I used. Cole jaws are for more than just finishing off bowls.
Back to top	IP Logged

Bert Delisle WR Addict Offline Posts: 1,424 Calgary Alberta Canada Gender:	Re: C&T - Cube Reply #52 - Jul 17^th, 2014 at 11:54am Very substantial jaws, great for woodturning wizardry projects.
Back to top	IP Logged

Bert Delisle WR Addict Offline Posts: 1,424 Calgary Alberta Canada Gender:	Re: C&T - Cube Reply #53 - Jul 17^th, 2014 at 12:04pm posted in gallery today.
Back to top	IP Logged

Ed Weber WR Administrator WR Patron Offline Posts: 8,989 Wilton California USA Gender:	Re: C&T - Cube Reply #54 - Jul 17^th, 2014 at 12:13pm Bert Delisle wrote on Jul 17^th, 2014 at 11:54am: Very substantial jaws, great for woodturning wizardry projects. I don't know about the wizardry aspect, but there is really no end to what you can hold. I have made several different sets, each for a specific application. BTW, these are mini cole jaws.
Back to top	IP Logged

Philip Peak WR Addict Offline Posts: 3,431 Southeastern Indiana Indiana USA Gender:	Re: C&T - Cube Reply #55 - Jul 18^th, 2014 at 4:31pm I am not making promises but if I can get in a good day of turning tomorrow, I will try and post by Sunday morning. If not then I am out.
Back to top	The woodturner formerly known as PhilipE. Willing to mentor members who live in the southeastern Indiana/Kentuckiana area (Louisville area) IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #56 - Jul 18^th, 2014 at 9:04pm Good luck everyone. 1 day left.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Dennis McManaman Full Member Offline WR Rocks! Posts: 86 Amarillo Texas USA Gender:	Re: C&T - Cube Reply #57 - Jul 19^th, 2014 at 8:36am I am hoping to finish mine today, Saturday, I am on the last of 5 cubes.... I will post pics of whatever comes out of it...
Back to top	Master sawdust and splinter maker. Life Member NRA Life Member VFW Life Member DAV Life Member American Legion American by birth, Patriot by Choice. IP Logged

Curtis Warstler Senior Member Offline WR Rocks! Posts: 354 Thornton Colorado USA Gender:	Re: C&T - Cube Reply #58 - Jul 19^th, 2014 at 10:31am Hey guys I am out work schedual isnt allowing for me time been exhausted and still have 1 more double and 2 days. Hopefully i can do the next challange.
Back to top	So many hobbies so little time..... IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #59 - Jul 19^th, 2014 at 9:31pm Mine is posted. The grain was crazy to work with. Several didn't survive. There are only 4 entries. Who else is waiting for the last minute. We gave you a month, but I've still received several requests for more time.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #60 - Jul 20^th, 2014 at 12:17am We are down to about 12 hours left!! And only 5 entries.
Back to top	« Last Edit: Jul 20^th, 2014 at 12:17am by JimQuarles » Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Philip Peak WR Addict Offline Posts: 3,431 Southeastern Indiana Indiana USA Gender:	Re: C&T - Cube Reply #61 - Jul 20^th, 2014 at 7:36am I didn't make it. Sorry. Still going to see if I can make what I wanted to do work out, hopefully in the next day or two.
Back to top	The woodturner formerly known as PhilipE. Willing to mentor members who live in the southeastern Indiana/Kentuckiana area (Louisville area) IP Logged

Tim Thompson Active Member Offline WR Rocks! Posts: 114 Columbia Tennessee USA Gender:	Re: C&T - Cube Reply #62 - Jul 20^th, 2014 at 8:43am Count me in!!!!!
Back to top	IP Logged

Dennis McManaman

Full Member

Offline

WR Rocks!

Posts: 86

Amarillo
Texas
USA
Gender: male

Re: C&T - Cube
Reply #63 - Jul 20^th, 2014 at 11:47am

Obviously at this point I am OUT, I shed blood sweat and no tears but the frustration level became extremely high.

All I can say is I have large bucket full of mahogany splinters and shavings and 5 chunks of wood that just did not turn out ... I don't know if it is the wood, my lack of experience with this wood or a combination of both.

I think my best lesson for something like this would be K.I.S.S.

All of you that completed and posted in the gallery, VERY well done and I think your pieces are awesome.

Someday I hope to be able post along side your turnings.

Sorry I could not finish

Back to top

Master sawdust and splinter maker.
Life Member NRA
Life Member VFW
Life Member DAV
Life Member American Legion
American by birth, Patriot by Choice.

IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #64 - Jul 20^th, 2014 at 12:30pm Tim's piece is Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or . We will get him logged in to the gallery soon.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Ed Weber

WR Administrator
WR Patron

Offline

Posts: 8,989

Wilton
California
USA
Gender: male

Re: C&T - Cube
Reply #65 - Jul 20^th, 2014 at 12:49pm

Dennis McManaman wrote on Jul 20^th, 2014 at 11:47am:

Obviously at this point I am OUT, I shed blood sweat and no tears but the frustration level became extremely high.

All I can say is I have large bucket full of mahogany splinters and shavings and 5 chunks of wood that just did not turn out ... I don't know if it is the wood, my lack of experience with this wood or a combination of both.

I think my best lesson for something like this would be K.I.S.S.

All of you that completed and posted in the gallery, VERY well done and I think your pieces are awesome.

Someday I hope to be able post along side your turnings.

Sorry I could not finish

Dennis, fear not, there will be another C&T with a different theme. With these C&T's, the challenge part is different for everyone, and not necessarily the turning portion. For myself the challenge part was to attempt to "lighten up" the clunky look of a cube. I had a feeling many would opt for the triangular style, so I wanted to go a different direction With my entry, I now have many ideas swimming around my head about inserts, lamination's and so on. That's one of the big pay-offs for me, (what it sparks) as well as seeing what the others come up with.
I am curious what you were trying to create that caused the mishaps for you if you don't mind describing it, maybe we can help.

Back to top

IP Logged

JimQuarles

WR Addict
WR Patron

Offline

WR Rocks, BIG Time!

Posts: 13,194

Glendale, AZ
Arizona
USA
Gender: male

Re: C&T - Cube
Reply #66 - Jul 20^th, 2014 at 1:04pm

I wish we had had more people participating, but we have some great pieces being traded. My "Rogue's Gallery" is still growing.

The pairings were done using Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

or

. The partners are:

Bob Hamilton <> Ed Weber
Bert Delisle <> Tony Rozendaal
Tim Thompson <> Jim Quarles

Send a PM to your partner with your mailing address. Try to get them in the mail by Saturday. If this is your first time sending a finished piece, do NOT start off with bubble wrap. First wrap it in paper towel or cloth. Bubble wrap WILL stick to the finish.

Ed & Tony, Since you are shipping to Canada, you will need to go to the PO and fill in a Form CN 22. I understand that this can be done online when you pay for your postage online, but I have not done any that way to explain the process. If you try it online, the boxes will need the same information as the paper form.

Check the box for Gift
Description (1) = Wooden Craft
Qty (2) = 1
Weight (3) = estimate of package weight or leave blank until you get to the PO
Value (4) = 00.
HS Tariff (5) = blank
Exemption (7) = Check first box NOEEI 30.37(a)
Print your name and address and then Recipient’s.
Sign and date (8)

Most contract stations (in gift shops etc) will not accept or even have Form CN 22, so you will need to go to a regular PO.

Thank you all for participating.

JimQ

Back to top

Mentor Basics, Pens, small stuff, Acrylics, EasyRougher.
Just Turnin' Around! Glendale, AZ Cool

"Right now I'm having amnesia and deja vu at the same time.
I think I've forgotten this before." - Steven Wright

IP Logged

Ed Weber WR Administrator WR Patron Offline Posts: 8,989 Wilton California USA Gender:	Re: C&T - Cube Reply #67 - Jul 20^th, 2014 at 1:28pm Sounds good Jim, hopefully we can get some more members involved in the next one. Thanks to everyone who participated in this (even if you didn't quite make it) a fine job by all.
Back to top	IP Logged

Bert Delisle WR Addict Offline Posts: 1,424 Calgary Alberta Canada Gender:	Re: C&T - Cube Reply #68 - Jul 20^th, 2014 at 3:38pm PM received and reply sent, Package will be in the mail tomorrow when the PO opens. Update; In the mail and on its way to Tony in Wi.
Back to top	« Last Edit: Jul 20^th, 2014 at 10:50pm by Bert Delisle » IP Logged

Bob Hamilton WR Addict Offline Posts: 1,118 Forest, Ontario, Canada Ontario Canada Gender:	Re: C&T - Cube Reply #69 - Jul 22^nd, 2014 at 1:13am I got mine sent off to Ed this afternoon.
Back to top	IP Logged

Jerry Toschlog Full Member Offline WR Rocks! Posts: 58 Centerville Indiana USA Gender:	Re: C&T - Cube Reply #70 - Jul 22^nd, 2014 at 8:17pm Well bummer, I have been busy with beekeeping and did not see this C&T as I have not visited as much lately .. I had fun last time ....
Back to top	IP Logged

Tony Rozendaal WR Addict Offline WR Rocks! Posts: 1,003 East Troy, WI Wisconsin USA Gender:	Re: C&T - Cube Reply #71 - Jul 22^nd, 2014 at 8:49pm Bert's is in the mailbox. I did the label electronically and printed it out here at home. We'll see how that works out. Thanks to Jim for the good advice on how to fill out the online USPS form.
Back to top	Turnin' and learnin' Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #72 - Jul 23^rd, 2014 at 12:09am Tim's is ready for the mailperson to pick up tomorrow.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Philip Peak WR Addict Offline Posts: 3,431 Southeastern Indiana Indiana USA Gender:	Re: C&T - Cube Reply #73 - Jul 24^th, 2014 at 5:19pm I am still trying to finish mine. The idea seemed so simple when I thought of it, who knew it would turn out to be so complicated.
Back to top	The woodturner formerly known as PhilipE. Willing to mentor members who live in the southeastern Indiana/Kentuckiana area (Louisville area) IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #74 - Jul 24^th, 2014 at 6:37pm
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Ed Weber WR Administrator WR Patron Offline Posts: 8,989 Wilton California USA Gender:	Re: C&T - Cube Reply #75 - Jul 25^th, 2014 at 5:20pm I just received a cube from Bob in Canada. Thank you very much. I hope mine gets to you just as quickly.
Back to top	« Last Edit: Jul 25^th, 2014 at 5:20pm by Ed Weber » IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #76 - Jul 25^th, 2014 at 9:49pm Remember , Saturday, July 26 is the deadline to get your pieces in the mail to your partner.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Bob Hamilton WR Addict Offline Posts: 1,118 Forest, Ontario, Canada Ontario Canada Gender:	Re: C&T - Cube Reply #77 - Jul 25^th, 2014 at 11:11pm Goodness, that was a fast 7 business days!
Back to top	IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #78 - Jul 26^th, 2014 at 4:27pm OK, The Post Office is closed for the day. Did everyone get their package shipped? We know that 4 have shipped and 2 of them have already been received.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Ed Weber WR Administrator WR Patron Offline Posts: 8,989 Wilton California USA Gender:	Re: C&T - Cube Reply #79 - Jul 26^th, 2014 at 7:14pm Mine is on it's way to Canada as we speak, eh
Back to top	IP Logged

Tony Rozendaal WR Addict Offline WR Rocks! Posts: 1,003 East Troy, WI Wisconsin USA Gender:	Re: C&T - Cube Reply #80 - Jul 28^th, 2014 at 7:40pm A Canadian mouse showed up here today. It's taken up residence on my desk here at home. Thanks, Bert.
Back to top	Turnin' and learnin' Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or IP Logged

Philip Peak WR Addict Offline Posts: 3,431 Southeastern Indiana Indiana USA Gender:	Re: C&T - Cube Reply #81 - Jul 28^th, 2014 at 9:11pm I know it is too late but I wanted to show what was supposed to be my C&T piece had I got done in time.
Back to top	Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or possible2.jpg (Attachment deleted) The woodturner formerly known as PhilipE. Willing to mentor members who live in the southeastern Indiana/Kentuckiana area (Louisville area) IP Logged

Guy Bratt WR Addict Offline WR Rocks! Posts: 940 Richmond Michigan USA Gender:	Re: C&T - Cube Reply #82 - Jul 29^th, 2014 at 4:53pm Interesting Phil. It's a bummer when things don't work out.
Back to top	Old, Fat,n Ugly...I shed 100 pounds this year. Still old. Still ugly. But what can you do at this age? You know? If you knew me you'd see my avatar and I really look a lot alike. IP Logged

Tony Rozendaal WR Addict Offline WR Rocks! Posts: 1,003 East Troy, WI Wisconsin USA Gender:	Re: C&T - Cube Reply #83 - Jul 30^th, 2014 at 7:44pm Philip Peak wrote on Jul 28^th, 2014 at 9:11pm: I know it is too late but I wanted to show what was supposed to be my C&T piece had I got done in time. That's really neat - something different.
Back to top	Turnin' and learnin' Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or IP Logged

Philip Peak WR Addict Offline Posts: 3,431 Southeastern Indiana Indiana USA Gender:	Re: C&T - Cube Reply #84 - Jul 31^st, 2014 at 2:56pm Thanks, it was DEFINITELY a challenge.
Back to top	The woodturner formerly known as PhilipE. Willing to mentor members who live in the southeastern Indiana/Kentuckiana area (Louisville area) IP Logged

Bert Delisle WR Addict Offline Posts: 1,424 Calgary Alberta Canada Gender:	Re: C&T - Cube Reply #85 - Aug 4^th, 2014 at 10:23pm Rolly polly hollow form was in the mail box when I got home, awesome piece of work. And a great story too. Thanks so much Tony. Great fit on the finial and short lid.
Back to top	Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or image_160.jpg (Attachment deleted) IP Logged

Tony Rozendaal WR Addict Offline WR Rocks! Posts: 1,003 East Troy, WI Wisconsin USA Gender:	Re: C&T - Cube Reply #86 - Aug 5^th, 2014 at 11:45pm Bert Delisle wrote on Aug 4^th, 2014 at 10:23pm: Rolly polly hollow form was in the mail box when I got home, awesome piece of work. And a great story too. Thanks so much Tony. Great fit on the finial and short lid. Thanks, Bert. It was just a little bit difficult to let that one go.
Back to top	Turnin' and learnin' Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to or IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #87 - Aug 6^th, 2014 at 12:06am That just means you will have to make another.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

Bob Hamilton WR Addict Offline Posts: 1,118 Forest, Ontario, Canada Ontario Canada Gender:	Re: C&T - Cube Reply #88 - Aug 6^th, 2014 at 6:04pm I got the cube from Ed Weber today, although we hadn't checked the mail since last week so it could have been sitting in the post office for a while. Very nice job, Ed! Thanks Bob
Back to top	IP Logged

Ed Weber WR Administrator WR Patron Offline Posts: 8,989 Wilton California USA Gender:	Re: C&T - Cube Reply #89 - Aug 7^th, 2014 at 10:22am I hope you like it Bob. I think that's the last of them, are we done Jim?
Back to top	IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #90 - Aug 7^th, 2014 at 1:40pm Still waiting on mine. The USPS returned it because they tried to deliver it in a different zip code.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged

JimQuarles WR Addict WR Patron Offline WR Rocks, BIG Time! Posts: 13,194 Glendale, AZ Arizona USA Gender:	Re: C&T - Cube Reply #91 - Aug 9^th, 2014 at 12:35pm Tim's arrived today, none the worst for having traveled 3 times between Tennessee and Arizona. Thanks Tim. Good job. It will rest with the other pieces in my "Rogue's Gallery" from earlier C&T's.
Back to top	Mentor Basics, Pens, small stuff, Acrylics, EasyRougher. Just Turnin' Around! Glendale, AZ "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." - Steven Wright IP Logged