The Woodturning Forum - Woodturner's Resource

Bruce L Jones

Senior Member

Offline

One Day At A Time

Posts: 250

Baltimore, MD
Maryland
USA
Gender: male

"Shifting Meridian"
Oct 16^th, 2019 at 1:54pm

Hello everyone Here is my latest piece,
" Shifting Meridian"
stands 22 inches tall and is 9 inches at it's widest point. It is made from Walnut with cherry stripes and it has a lacquer finish. The open air ribs are over 2 1/2 inches long and 5/16 of an inch wide. This was my biggest challenge yet for a open air project. C&C Welcome
Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

or

Back to top

Jack of all master of none.

https://www.facebook.com/serenityartisans

IP Logged

Register To Remove Ads

Glenn Roberts Senior Member Offline WR Rocks! Posts: 355 Walworth, NY New York USA Gender:	Re: "Shifting Meridian" Reply #1 - Oct 16^th, 2019 at 5:29pm The craftsmanship is mind boggling....
Back to top	The older I get, the better I was........ IP Logged

Robert Hayward Senior Member Offline WR Rocks! Posts: 362 Tampa area Florida USA Gender: 3520b	Re: "Shifting Meridian" Reply #2 - Oct 16^th, 2019 at 6:35pm Excellent workmanship!
Back to top	IP Logged

Ray Stubbs Active Member Offline WR Rocks! Posts: 166 Columbia, Mo. USA Gender:	Re: "Shifting Meridian" Reply #3 - Oct 16^th, 2019 at 8:06pm Looks very nice Bruce. What would one put in this vessel? I do like the shape and finish. Good job.
Back to top	IP Logged

Ralph Fahringer WR Addict Offline I'm the "Burly" Man!! Posts: 1,302 Ellsworth Maine USA Gender: PM3520b	Re: "Shifting Meridian" Reply #4 - Oct 17^th, 2019 at 1:44pm Based on all the openings, my retirement fund. ...orrrr... you could drill a tiny hole in the bottom and install an LED light that would sort of glow. Nothing bright, just enough to give it "the glow". Remember, if it doesn't hold soup, it's art. Well, this one is definitely art!!
Back to top	« Last Edit: Oct 17^th, 2019 at 1:45pm by Ralph Fahringer » Originality is the art of concealing your source. IP Logged

Don R Davis Senior Member Offline WR Rocks! Posts: 269 Murfreesboro Tennessee USA Gender: Jet 12-21 lathe which is a nice upgrade from my spindle lathe.	Re: "Shifting Meridian" Reply #5 - Oct 17^th, 2019 at 6:55pm Bruce, you have outdone your self. I love it.
Back to top	IP Logged

Bruce L Jones Senior Member Offline One Day At A Time Posts: 250 Baltimore, MD Maryland USA Gender:	Re: "Shifting Meridian" Reply #6 - Oct 17^th, 2019 at 9:35pm Thank you everyone for your nice comments...Ray It's art you could put dry flowers in there if you wanted to. I had a few requests on other sites to see the top & bottom better so here's a few more shots.
Back to top	Jack of all master of none. IP Logged

Grant Wilkinson WR Addict Offline Posts: 751 Ottawa Ontario Canada	Re: "Shifting Meridian" Reply #7 - Oct 18^th, 2019 at 8:39am Too good, Bruce!
Back to top	Grant Wilkinson Ottawa ON IP Logged

Register To Remove Ads

Ed Weber

WR Administrator
WR Patron

Online

Posts: 7,268

Wilton
California
USA
Gender: male

JET 1642
Grizzly G0584

Re: "Shifting Meridian"
Reply #8 - Oct 18^th, 2019 at 9:04am

I won't go into what I think about the piece but I will say you need to work on your photos.
your photos are how others perceive your work, the initial impression needs to be a good one.

Your photos of this piece have way too many hot spots (light reflections). These hot spots are not only distracting but they actually obscure parts of the piece itself.
I suggest that you need to move and/or diffuse your lighting sources.
This is an example using the last piece that I posted, the difference is quite obvious.

Back to top

IP Logged

Bruce L Jones Senior Member Offline One Day At A Time Posts: 250 Baltimore, MD Maryland USA Gender:	Re: "Shifting Meridian" Reply #9 - Oct 18^th, 2019 at 1:33pm Yea Ed why don't you talk about the wood work? I don't care about the photography for a web site, when I need to send photos to my gallery or someone important I'll have a pro take them. I'm an Artisan not a photographer.
Back to top	Jack of all master of none. IP Logged

Steve nix Senior Member Offline WR Rocks! Posts: 271 Iota Louisiana USA Gender: 1642 Jet, RobustAB	Re: "Shifting Meridian" Reply #10 - Oct 18^th, 2019 at 5:34pm Great piece Bruce, keep them coming.
Back to top	IP Logged

Ed Weber

WR Administrator
WR Patron

Online

Posts: 7,268

Wilton
California
USA
Gender: male

JET 1642
Grizzly G0584

Re: "Shifting Meridian"
Reply #11 - Oct 18^th, 2019 at 7:19pm

Bruce L Jones wrote on Oct 18^th, 2019 at 1:33pm:

Yea Ed why don't you talk about the wood work? I don't care about the photography for a web site, when I need to send photos to my gallery or someone important I'll have a pro take them. I'm an Artisan not a photographer.

JUST MY OPINION

First of all, it's your piece, you present it how you want to. I was only trying to offer some helpful suggestions for how you (and other members) can better display your work. A poor image is no different than a poor finish. A negative first impression is a hard to erase. I think how you present your piece, whether it be in a display on in a photo is just one more part of the artistic process.

I am not a photographer either but I did teach myself enough to be able to display my pieces so that the work I put into them is accurately represented in the photos.

The piece itself I find confusing.
Open segmenting, laminating and carving in the same piece does not work for me. There are several design decisions that were made that I don't care for, which is why I didn't want to comment.
Please remember, this is not a personal attack, just my opinion of the piece the way it's presented to me. I can only go by what I see on the screen.

Back to top

IP Logged

David Hamann WR Administrator WR Patron Offline papadave Posts: 5,685 Pasco WA Washington USA Gender: Jet 1014VSI	Re: "Shifting Meridian" Reply #12 - Oct 19^th, 2019 at 2:42am not a bad piece, just not my style. i do think the base is small and the transition from large to long neck is awkward. also too busy. just my
Back to top	“Be who you are and say what you feel, because those who mind don’t matter and those who matter don’t mind.” - Ted Geisel Be yourself, after all, everyone else is taken. IP Logged

Ron Sardo

WR Administrator
WR Patron

Offline

Chief cook and bottle
washer

Posts: 9,493

Drums
Pennsylvania
USA

PM 3520

Re: "Shifting Meridian"
Reply #13 - Oct 20^th, 2019 at 8:39am

Bruce L Jones wrote on Oct 16^th, 2019 at 1:54pm:

This was my biggest challenge yet for a open air project. C&C Welcome

Bruce L Jones wrote on Oct 18^th, 2019 at 1:33pm:

Yea Ed why don't you talk about the wood work? I don't care about the photography for a web site, when I need to send photos to my gallery or someone important I'll have a pro take them. I'm an Artisan not a photographer.

Because you asked for comments and critiques and an honest C&C encompasses all, including the photography.

Back to top

« Last Edit: Oct 20^th, 2019 at 8:43am by Ron Sardo »

Multimedia File Viewing and Clickable Links are available for Registered Members only!! You need to

or

IP Logged